http://defect.opensolaris.org/bz/show_bug.cgi?id=8769
Summary: NWAM initially connect to wifi, but switching NCP causes
it to fail to connect.
Classification: Development
Product: nwam
Version: unspecified
Platform: ANY/Generic
OS/Version: All
Status: NEW
Status Whiteboard: nwam1-build:2009-05-06
Severity: minor
Priority: P3
Component: ON daemon
AssignedTo: nwam-dev at opensolaris.org
ReportedBy: dkenny at opensolaris.org
QAContact: nwam-dev at opensolaris.org
Created an attachment (id=1893)
--> (http://defect.opensolaris.org/bz/attachment.cgi?id=1893)
NWAM Debug messages
When doing a svcadm refresh nwam, after resuming my machine, NWAM started up
with the User profile, and connecting on iwh0 to my local WLAN - which seemed
ok, but for some reason it didn't fill out the DHCP for the WLAN into
/etc/resolv.conf.
So I tried to go to Automatic mode...
When I ran: nwamadm enable -p ncp Automatic
NWAM disconnected the wifi, and then tried to reconnect.
In doing this - it brought down all the network interfaces (e1000g0 and iwh0)
but only plumbed e1000g0.
As such, because iwh0 was unplumbed, all the attempts to connect to the WLAN
returned an "operation timedout" message.
No end of disable/enable of nwam would make it plumb iwh0 before doing the
connect.
In the end, I disabled NWAM, and manually connected to the WLAN by running the
commands manually, to plumb iwh0, then dladm connect-wifi and then running
DHCP, and this all worked fine.
Attached is the log
--
Configure bugmail: http://defect.opensolaris.org/bz/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
You are the assignee for the bug.
