http://defect.opensolaris.org/bz/show_bug.cgi?id=8941

           Summary: nwam will not bring up wireless at all.
    Classification: Development
           Product: nwam
           Version: unspecified
          Platform: ANY/Generic
        OS/Version: All
            Status: NEW
 Status Whiteboard: nwam1-build:2009-05-12
          Severity: major
          Priority: P2
         Component: ON daemon
        AssignedTo: nwam-dev at opensolaris.org
        ReportedBy: dkenny at opensolaris.org
         QAContact: nwam-dev at opensolaris.org


Created an attachment (id=1946)
 --> (http://defect.opensolaris.org/bz/attachment.cgi?id=1946)
nwamd log

I'm not sure why, but today, I simply cannot get NWAM to connect to my
wireless. 

My AP is right beside me, so the signal is strong, but I don't believe that
it's got anything to do with that.

What seems to be happening is that there are several nwamd.error messages being
logged to syslog, along the lines of :

nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
last message repeated 2 times
nwamd[2693]: [ID 584691 daemon.error] 1: nwamd_loc_handle_enable_event: no loc
object NoNet
nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
last message repeated 8 times
nwamd[2693]: [ID 937566 daemon.error] 1: plumb_unplumb_interface: plumb failed
for e1000g0: Could not plumb ARP stream
nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
last message repeated 14 times
iwh: [ID 335086 kern.warning] WARNING: iwh_load_init_firmware(): timeout
waiting for init uCode load.
iwh: [ID 326797 kern.warning] WARNING: iwh_init(): failed to setup init
firmware
iwh: [ID 335086 kern.warning] WARNING: iwh_load_init_firmware(): timeout
waiting for init uCode load.
iwh: [ID 326797 kern.warning] WARNING: iwh_init(): failed to setup init
firmware
iwh: [ID 303529 kern.warning] WARNING: iwh_init(): failed to load init firmware
nwamd[2693]: [ID 366495 daemon.error] 1: plumb_unplumb_interface: plumb failed
for iwh0: Could not plumb ARP stream
nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
nwamd[2693]: [ID 828708 daemon.error] 1: couldn't bring e1000g0 up
nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
last message repeated 14 times
nwamd[2693]: [ID 984091 daemon.error] 1: couldn't bring iwh0 up
nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
last message repeated 9 times
mac: [ID 744254 kern.info] NOTICE: iwh0 link up
in.routed[860]: [ID 749644 daemon.notice] iwh0 has a bad address 0.0.0.0
nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
last message repeated 1 time
/sbin/dhcpagent[73]: [ID 778557 daemon.warning] configure_v4_lease: no IP
broadcast specified for iwh0, making best guess
nwamd[2693]: [ID 402216 daemon.error] 1: nwamd_event_send: nwam_event_send:
entity not found
last message repeated 5 times

The last message where iwh0 is finally "up" is when I manually did a dladm
connect-wifi - otherwise nwamd didn't even seem to acknowledge that it was even
a wireless driver since there wasn't any apparent references to a scan or
similar in the debug logs.

With this, things are simply not usable in the default state.

-- 
Configure bugmail: http://defect.opensolaris.org/bz/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
You are the assignee for the bug.

Reply via email to