Anurag and Renee,
For LINK ncus, there're properties 'priority-group' and 'priority-mode',
several ncus may be in the same priority-group, for example, 1; I want to know
if the priority-mode of each ncu should be the same value, say 'exclusive' ? if
so ,the priority-mode property is not tight with ncu but with group 1, and we
may add some duplicate properties for these ncus, is it right ? or am I missing
something ?
priority-group: uint64: group priority number
If activation-mode is set to "prioritized," this property specifies the
priority group to which this NCU belongs. A group consists of one or more NCUs;
smaller numbers are higher priority. The highest priority group that is
determined to be available will be activated by nwamd, and will remain so until
it is no longer available, or a higher priority group becomes available.
priority-mode: enumerated value: exclusive | shared | all
If activation-mode is set to "prioritized," this property specifies the
mode used to determine availability and activation behavior for a priority
group.
o exclusive: at least one NCU must be available to make the group
available; and only one NCU will be activated. If more than one member NCU is
available, nwamd will randomly choose one to activate.
o shared: at least one NCU must be available to make the group
available; all available NCUs will be activated.
o all: all group member NCUs must be available to make the group
available; all member NCUs will be activated.
--
Thanks,
Lizhong
