First create a new BE and boot into that .
$ pfexec bash
# beadm create nwam-be
# reboot -p (or reboot if -p gives an error)
In the boot menu, select "nwam-be".
Now, in the new BE, check with "beadm list" and make sure "nwam-be" is
active (with N) and mountpoint at "/".
$ pfexec bash
Then, in the same command line:
#
/net/trigati.east/export/build/am223141/nwam1-build/usr/src/tools/scripts/bfu
/net/trigati.east/export/build/am223141/nwam1-build/archives/i386/nwam1-build-RC-current
When bfu is done,
# acr
Then,
# reboot -p
The GUI has to be installed separately.
At boot menu, again choose "nwam-be" for nwam phase 1.
$ pfexec bash
# cd
/net/jdsserv.ireland/scratch/month/darrenk/NWAM_Manager_Phase_1/i386/2009-10-06
# ./update_nwam_manager.sh
log out and log back in and the GUI will be running too.
After boot, most times hereafter, you will run into
11685 on boot, no interfaces and empty Automatic NCP
http://defect.opensolaris.org/bz/show_bug.cgi?id=11685
The workaround is to restart nwam with "svcadm restart nwam".
Anurag
Juanita Heieck wrote:
> Thanks Anurag.
>
> I've never done a bfu before, so how would I type the entire command?
>
> Renee told me to use the path
> /net/trigati.east/export/build/am223141/nwam1-build/archives/i386.
>
> Do I just append that path with a space, then the bfu command,
> followed by the nightly.date.date I want?
>
> /net/trigati.east/export/build/am223141/nwam1-build/archives/i386 bfu
> nightly...?
>
> Or do I type it differently?
>
> Nita
>
> On 10/06/09 13:29, Anurag S. Maskey wrote:
>> You can use the bfu that's in the build workspace:
>>
>> /net/trigati.east/export/build/am223141/nwam1-build/usr/src/tools/scripts/bfu
>>
>>
>>
>> and the archives
>>
>> /net/trigati.east/export/build/am223141/nwam1-build/archives/i386
>> /net/zhadum.east/export/ws/am223141/nwam1-build/archives/sparc
>>
>> Anurag
>>
>>
>> Juanita Heieck wrote:
>>> Hi,
>>>
>>> I am all set up to do a bfu from trigate.east and the full path
>>> for the bfu command that
>>> I got from one of the folks in BRM comes back as "command not found",
>>> so it must be something different for .east.
>>>
>>> Does anyone have that info and can send it asap?
>>> I'm in a flex office in Colo Springs and I have
>>> to leave in about 20 minutes.
>>>
>>> Thanks much!
>>>
>>> Nita
>>>
>>> _______________________________________________
>>> nwam-dev mailing list
>>> nwam-dev at opensolaris.org
>>> http://mail.opensolaris.org/mailman/listinfo/nwam-dev
>
