http://defect.opensolaris.org/bz/show_bug.cgi?id=11020
--- Comment #4 from Robert Kinsella <robert.kinsella at sun.com> 2009-10-13 13:38:21 UTC --- Created an attachment (id=2810) nwam text log file nwam rc2 sparc & x86 this problem is still present on RC2 build testcase with connection status on view disconnect one cable froma system with 2 or more attached interfaces. expeect result connection status view should show interface which has been unplugged as disconnected. Alos tried testcase where User profile was being used and the interface e.g. bge0 which was disconnected was grouped in the always enable group, again the interface was not listed in the connection status view after it had been disconnected. # nwamadm show-events -v EVENT DESCRIPTION LINK_STATE bge0 -> state down OBJECT_STATE ncu link:bge0 -> state online*, interface/link is down OBJECT_STATE ncu link:bge0 -> state offline, interface/link is down OBJECT_STATE ncu interface:bge0 -> state online*, conditions for act OBJECT_STATE ncu interface:bge0 -> state offline, conditions for act IF_STATE bge0 -> state (0) flags 2004801 IF_STATE bge0 -> state (0) flags 2004800 IF_STATE bge0 -> state (0) flags 1004803 IF_STATE bge0 -> state index 4 flags 0x0 address fe80::214:4fff: IF_STATE bge0 -> state (0) flags 1004802 IF_STATE bge0 -> state index 4 flags 0x0 address 129.156.235.229 IF_STATE bge0 -> state (0) flags 1004803 IF_STATE bge0 -> state (0) flags 1004802 IF_STATE bge0 -> state (0) flags 1004803 IF_STATE bge0 -> state (0) flags 1004802 nwamadm list -x ncu:phys bge0 offline interface/link is down ncu:ip bge0 offline conditions for activation are unmet -- Configure bugmail: http://defect.opensolaris.org/bz/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug.
