Anurag S. Maskey wrote: > Updated test results after John fixed some tests: > > > Summarized Test Results > ----------------------- > > ncp: all tests pass > > location: all tests pass > > nwamadm: all tests pass > > auth: all tests fail oweing to the fact that authorizations have changed > > > enm > > - tests 1, 2, 3, 8 - nwam_test_user (that the tests run as) should have > updated authorizations and profiles to run svcadm(1M) commands for ENMs > with FMRIs. > > > nwamcfg interactive > > - tests 39, 40 - can create NCPs other than "User", fix test expectation > > > nwamcfg non-interactive > > - test 36 - can create NCPs other than "User", fix test expectation > > > event (new numbering) > > - tests 29, 30, 31, 32, 33, 34, 70, 71, 72, 73 - log shows attempt to > select/modify NCU for second interface (bge1/ce1), but no such NCUs are > created in the first place (only NCUs for bge0/ce0 exist) > > - test 41 - does a "nwamadm disable" of a location that was > conditionally enabled. not allowed. can do a "nwamadm disable" of a > conditional location only it is was manually enabled. >
This test was supposed to be renamed to test 50 - if the old test is around, it should be deleted. > - test 50 - does a "nwamadm disable" of a location that was > conditionally enabled. The test expects this to fail (which is the > correct). The return value, however, is 0. That's because the > location's "enabled" value is false (since it wasn't manually enabled) > and thus, returns success. This is similar to disabling an already > disabled SMF service and it returns 0. > Ok, I can remove the return value check. > - test 60 - condition is on the static v6 address (from the config > file), but NCU does not configure a static v6 address > > - test 67, 69 - continually fails on x86, but not on SPARC. Manually > doing what the test does gives successful/expected results. > > The other issues I'll have to look into. > Missing Tests > ------------- > > New tests need to be added for the recently pushed RFEs. > > => output of list (in both nwamadm and nwamcfg) is sorted alphabetically > => conditions can be based on NCP also "ncp <foo> is/is-not active" > => object names are *not* case-sensitive > => list and walkprop have a "-a" option that lists and walks all > properties (the usage message also has changed) > => new authorizations added and scope of existing ones changed > => Network Autoconf split into two different profiles > => Multiple NCPs are supported > > _______________________________________________ > nwam-dev mailing list > nwam-dev at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/nwam-dev
