You need the Outdoor Router software - the AP500 is only an access
point.
You can download the s/w from their website then buy a license key for
the OR functionality. Its not cheap.
Regards
Eden
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of
> Bleugh @ Eircom.net
> Sent: 10 May 2002 15:31
> To: [EMAIL PROTECTED]
> Subject: [nycwireless] How to get 2 x Orinoco AP-500's to communicate?
>
>
> Hey guys,
> Ive setup up 2 locations (about 1 km apart)
>
> Location 1 has 1 computer connected to an AP-500 by crossover
> cable and
> shows the AP-500 perfectly.
> Location 2 has the AP-500 hooked into the network and has it
> showing up
> perfectly.
>
> Both Antennaes have line of site.
>
> Maybe im configuring something wrong, ive set up seperate
> IP's on the same
> subnet on each.
> All I want is to have the computer in Location 1 hooking into our main
> network at Location 2.
> The AP's just dont seem to be seeing one another...
>
> Any idea's folks? All help Appreciated!
>
> |Chief|
>
> --
> NYCwireless - http://www.nycwireless.net/
> Un/Subscribe:
> http://lists.nycwireless.net/mailman/listinfo/> nycwireless/
>
> Archives:
> http://lists.nycwireless.net/pipermail/nycwireless/
>
--
NYCwireless - http://www.nycwireless.net/
Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/
Archives: http://lists.nycwireless.net/pipermail/nycwireless/
