On Wednesday 09 October 2002 02:28 am, Kev wrote: > Hi, This might be somewhat off the topic here, but I am trying to patch my > Orinoco drivers in Linux to work with kismet-monitor. I patched the > snax's Orinoco driver version 0.9b update for pcmcia-cs 3.1.33 and > recompiled pcmcia-cs but for some odd reason the make process will skip > over the patched source files and refuse to allow me to compile a new set > of drivers! Does anyone have experience with this?
I got Kismet working under Linux 2.4.19 with an Orinoco Gold card using the instructions at http://awip.truffula.net/index.php/KismetOrinoco I skipped step 1 from the instructions (changing the card's firmware). If found that the calling sequence for Kismet (step 7) didn't work reliably so I also created a wrapper to run Kismet: #!/bin/bash iwpriv eth1 monitor 2 6 sleep 3 kismet kismet_unmonitor sleep 3 /etc/init.d/pcmcia restart (eth1 is the wireless card's interface) Hope this helps > > Also, any reports of luck with the patched Orinoco Silver->128 Bit > Encryption working in kismet? -- NYCwireless - http://www.nycwireless.net/ Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/ Archives: http://lists.nycwireless.net/pipermail/nycwireless/
