Hello ,
Now I want to start with the published pebble distribution. However there are still some problems. After reading pebble.README in the os tarball, I just follow the instruction, 1. creating /mnt/cf and /mnt/pebble and unpack the tarball to /mnt/pebble 2. running ./pebble.update 3. input necessary configuration at the beginning such as install directory and cf mount point and select for installation for soekris4521 4. Here is the error information I get Fatal: stat /dev/sdb: No such file or directory Fatal Error: Failed to chroot to /mnt/cf to install lilo I suppose the error is due to there is no /dev/sdb device file on the compact flash card So can anyone help? PS. I am running on ubuntu7.1 and I have checked that all the necessary tools are installed against the README file On 5/15/08, jun shen <[EMAIL PROTECTED]> wrote: > > Sorry, I guess I didnt make myself understood. > > I need complete pebble linux kernel code to compare with the standard > kernel code in order to find the difference. > > Can you find the pebble linux kernel code v2.4.26? > > As I described before, the error message I got when using old pebble config > file is : > > make: *** No rule to make target `include/linux/autoconf.h', needed by > `include/config/MARKER'. Stop. > > > On Thu, May 15, 2008 at 3:08 PM, Terry Schmidt <[EMAIL PROTECTED]> > wrote: > >> the complete os tar ball is available here. >> http://www.nycwireless.net/wp-content/uploads/2008/03/pebble.v42.tar.bz2 >> >> It includes the /boot/config* files >> >> You can use the debian build tools to rebuild the kernel. >> >> --Terry >> >> On May 15, 2008, at 6:01 PM, jun shen wrote: >> >> I compile v2.4.26, under ubuntu7.1(kernel v2.6.22), >> >> I think I miss some files, because the kernel code doesnt include >> /include/config directory, which is required by the build to go on. If you >> can find these files, that will be fine. >> >> It will be better that you send me the complete os tar ball. I can find >> what is missing by myself. >> >> Thanks a lot. >> >> On Thu, May 15, 2008 at 2:50 PM, Terry Schmidt <[EMAIL PROTECTED]> >> wrote: >> >>> What distro are you compiling under? What version? Ideally it would be >>> a version of debian around the version of debian that pebble was made under. >>> The old pebble.tar.gz is the complete OS .tar.gz. I can probably find it >>> somewhere, but other than the /boot/config file I don't think it will give >>> you anything else to compile it. >>> >>> --Terry >>> On May 15, 2008, at 3:43 PM, jun shen wrote: >>> >>> Hello Terry, >>> >>> I meet one problem when compiling kernel v.2.4.26 with pebble config >>> file. The following is error discription: >>> >>> make: *** No rule to make target `include/linux/autoconf.h', needed by >>> `include/config/MARKER'. Stop. >>> >>> I have checked that either autoconfg.h or MARKER doesnt exist in kernel >>> code distribution. And I am compiling the kernel with gcc2.95.3. >>> >>> Can you help me figure out what to do next? Or can you send me old >>> pebble.tar.gz? >>> >>> On Thu, May 15, 2008 at 11:55 AM, Terry Schmidt <[EMAIL PROTECTED]> >>> wrote: >>> >>>> The kernel is available from www.kernel.org The makefile / config file >>>> is available in /boot/ on the Pebble Linux distro to recreate the kernel >>>> that was use to make Pebble. >>>> This should be all you need in order to recreate a new kernel for Pebble >>>> (other than Madwifi which I added to it). >>>> >>>> Jun, does this help, or do you need the old Pebble Linux .tar.gz? >>>> >>>> On May 15, 2008, at 2:48 PM, Dustin Goodwin wrote: >>>> >>>> Terry, >>>> Can you help? >>>> >>>> - Dustin >>>> >>>> On Thu, May 15, 2008 at 2:45 PM, jun shen <[EMAIL PROTECTED]> >>>> wrote: >>>> >>>>> Hello Dustin, >>>>> >>>>> Thanks for your reply. >>>>> >>>>> Actually, I want old pebble linux v2.4.26 to reproduce other's >>>>> simulation, however, that is not available from pyramid linux, because >>>>> pyramid linux is v2.6.x. >>>>> >>>>> Do you have any suggestions? >>>>> >>>>> >>>>> On Thu, May 15, 2008 at 11:42 AM, Dustin Goodwin < >>>>> [EMAIL PROTECTED]> wrote: >>>>> >>>>>> Check out pyramid Linux. >>>>>> http://pyramid.metrix.net/ >>>>>> >>>>>> - Dustin >>>>>> >>>>>> >>>>>> On Thu, May 15, 2008 at 1:20 PM, jun shen <[EMAIL PROTECTED]> >>>>>> wrote: >>>>>> >>>>>>> Hello list owner, >>>>>>> >>>>>>> Can you explain why my message is rejected? Thanks. >>>>>>> >>>>>>> ---------- Forwarded message ---------- >>>>>>> From: <[EMAIL PROTECTED]> >>>>>>> Date: Thu, May 15, 2008 at 9:53 AM >>>>>>> Subject: question about pebble linux >>>>>>> To: [EMAIL PROTECTED] >>>>>>> >>>>>>> >>>>>>> You are not allowed to post to this mailing list, and your message >>>>>>> has >>>>>>> been automatically rejected. If you think that your messages are >>>>>>> being rejected in error, contact the mailing list owner at >>>>>>> [EMAIL PROTECTED] >>>>>>> >>>>>>> >>>>>>> >>>>>>> ---------- Forwarded message ---------- >>>>>>> From: "jun shen" <[EMAIL PROTECTED]> >>>>>>> To: nycwireless@lists.nycwireless.net >>>>>>> Date: Thu, 15 May 2008 09:47:23 -0700 >>>>>>> Subject: question about pebble linux >>>>>>> Hello, >>>>>>> >>>>>>> I am interested in setting up soekris board with old pebble linux. >>>>>>> Furthermore, I want to do some changes to the linux kernel code. So I >>>>>>> need a >>>>>>> copy of pebble linux kernel. And I noticed that nycWireless no longer >>>>>>> supported Pebble Linux. So I wonder where I can obtain pebble linux >>>>>>> kernel >>>>>>> code. >>>>>>> >>>>>>> Can anybody help me? >>>>>>> >>>>>>> -- >>>>>>> Regards, >>>>>>> Jun >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Regards, >>>>>>> Jun >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Regards, >>>>> Jun >>>> >>>> >>>> >>>> >>> >>> >>> -- >>> Regards, >>> Jun >>> >>> >>> >> >> >> -- >> Regards, >> Jun >> >> >> > > > -- > Regards, > Jun -- Regards, Jun -- NYCwireless - http://www.nycwireless.net/ Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/ Archives: http://lists.nycwireless.net/pipermail/nycwireless/
