It is still end to end authentication with opaque tokens — since all OAuth tokens, including PoP tokens, have always been intended to be opaque to the client. That hasn’t changed and that isn’t the intent of this document. If that’s how people are reading it then we need to pull it back and rewrite it so that’s not the case.
The client gets a token that has two parts: the token and the key. The token is analogous to the access_token we have today and would come out of the server in the same field. The key is handed to the client alongside the token or registered by the client during the token request. Either way there’s an association between the two but it’s not the same association as a public/private keypair. It’s possible to sign the token itself, but the client doesn’t care. It sends the token and signs the HTTP request to the RS whether the token is signed, unsigned, hex blob, encrypted, or anything else. The same series of options are available as with bearer tokens. PoP tokens have never, ever been intended to be anything but opaque to the client. The token can’t be opaque to the RS, which has to figure out what key to use to check the message signature. But we’ve got options there, like the embedded key in a JWT from Mike’s draft, or doing introspection to get the key (from an extension that hasn’t been written yet), or simply looking it up in the same database because the RS and the AS are in the same box. Does this structure/service/database choice sound familiar? It should, it’s the same as bearer tokens. This is also how the RS gets information like which scopes are associated with the token, if it’s expired, and all that. So here’s how I see it going on the wire: (I just wrote this up so there are probably holes. Here’s the source if anyone wants to tweak it: http://www.websequencediagrams.com/?lz=cGFydGljaXBhbnQgQ2xpZW50IGFzIEMKAAwMUmVzb3VyY2UgT3duZXIgYXMgUk8AFA1BdXRob3JpemF0aW9uIFNlcnYAIQZBUwA7DVByb3RlY3RlZABICmFzIFJTCgoKClJPLS0-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&s=modern-blue ) The client is oblivious to the token just like always. This is intentional. The RS has the same options to figure out how to process the token. — Justin > On Nov 25, 2015, at 2:03 PM, Phil Hunt <[email protected]> wrote: > > Folks, > > <editor hat> > I did not want to go here either. :-) > > I don’t read sec 6 as examples. I believe this may stem from the > pop-architecture documents having a dual role as both “architecture” and > “use-case”. Maybe we should clarify the purpose of the document? > > I believe section 6 is talking about threat mitigation assumptions based on > the examples that need to be implemented. I am assuming these are > requirements that the other specifications SHOULD implement. > > <personal hat> > I do not believe we have discussed Opaque PoP tokens and any inherent risks > because the client is not or is unable to validate the authenticity of the > token. Does this introduce the possibility of a MITM attack where a client > can be convinced to sign requests for an attacker? > > If we want to include opaque PoP, I think we need to take a pause and > consider / discuss any threats here. > > I find the desire for opaque PoP tokens to be a bit contradictory. If we’re > saying we don’t want to trust TLS alone (e.g. because of load-balancer > termination), why would we then say, but we are perfectly willing to accept > it worked for the OAuth AS exchanges? Maybe I was very wrong here, but my > assumption all along is that for PoP we’re talking about end-to-end > authentication of all parties except in the case of 3.3 where we simply want > to protect an access token over a non-TLS HTTP connection. > > > Phil > > @independentid > www.independentid.com <http://www.independentid.com/>[email protected] > <mailto:[email protected]> >> On Nov 25, 2015, at 10:48 AM, Brian Campbell <[email protected] >> <mailto:[email protected]>> wrote: >> >> While I can't say I disagree with the deeper existential questions about the >> draft that Justin raises, I was trying not to go there and rather just point >> out concerns with the newly added text. >> >> The text Phil cites from Sec 6 doesn't say the client must be able to parse >> and verify the token. It's an assumption to simplify the examples that >> follow and still the token is opaque to the client. I reread the whole draft >> (reluctantly) and there's nothing that says the token has to be non-opaque >> to the client. And it does talk about reference style tokens and encrypted >> tokens, both of which rely on the opaqueness to the client. >> >> On Wed, Nov 25, 2015 at 11:27 AM, Justin Richer <[email protected] >> <mailto:[email protected]>> wrote: >> Right, I read that as text for describing the examples and not for >> describing requirements. >> >> The token itself doesn’t have to be signed at all. >> >> — Justin >> >>> On Nov 25, 2015, at 1:05 PM, Phil Hunt <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Ok. Well this was requested by Kathleen because of this paragraph in Sec 6.… >>> >>> To simplify the subsequent description we assume in the PoP architecture >>> that the token itself is digitally signed by the authorization server >>> and therefore cannot be modified. >>> >>> Please >>> Phil >>> >>> @independentid >>> www.independentid.com <http://www.independentid.com/>[email protected] >>> <mailto:[email protected]> >>>> On Nov 25, 2015, at 9:33 AM, Justin Richer <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> >>>> The token doesn’t have to be signed and the client doesn’t have to verify >>>> the signature on the token. That’s not PoP. The request has to be signed >>>> in a way that includes the token. The token itself can still be opaque. >>>> The *key* material can’t be opaque to the client, but the *token* material >>>> still is. >>>> >>>> I agree with Brian that this statement is misleading. >>>> >>>> The examples use a signed token but that is absolutely not a requirement. >>>> Maybe the examples shouldn’t all use one style. >>>> >>>> What’s most difficult about this particular spec is that it’s very >>>> hand-wavy, saying “this is kinda a thing that kinda works like this” >>>> without saying how to actually do it. I’m honestly not sure it’s worth >>>> publishing as an RFC in its own right but I’m not going to stand in its >>>> way. >>>> >>>> — Justin >>>> >>>>> On Nov 25, 2015, at 12:14 PM, Brian Campbell <[email protected] >>>>> <mailto:[email protected]>> wrote: >>>>> >>>>> Where does it say that? >>>>> >>>>> >>>>> >>>>> On Wed, Nov 25, 2015 at 8:44 AM, Phil Hunt <[email protected] >>>>> <mailto:[email protected]>> wrote: >>>>> Except that later on we require the token be signed and the client verify >>>>> that signed token. IOW mutual pop. >>>>> >>>>> Phil >>>>> >>>>> On Nov 25, 2015, at 07:30, Brian Campbell <[email protected] >>>>> <mailto:[email protected]>> wrote: >>>>> >>>>>> Looking at the diff I noticed the following new text, which seems to >>>>>> conflate bearer/PoP and opaqueness to the client. A client demonstrating >>>>>> proof-of-possession of some key is orthogonal to the client being able >>>>>> to parse and understand the access token itself. >>>>>> >>>>>> "In contrast to bearer tokens [RFC6750] which call for tokens that are >>>>>> opaque to OAuth 2.0 clients, this specification defines the requirements >>>>>> for proof-of-possession ("PoP") tokens that may be parsed and verified >>>>>> by OAuth 2.0 clients and relying parties." >>>>>> >>>>>> On Tue, Nov 24, 2015 at 1:07 PM, Phil Hunt <[email protected] >>>>>> <mailto:[email protected]>> wrote: >>>>>> This draft addresses review comments from Kathleen and Erik raised since >>>>>> the last draft. >>>>>> >>>>>> It may not include some of the discussion from yesterday/today. I will >>>>>> add that as the group decides. >>>>>> >>>>>> Cheers, >>>>>> >>>>>> Phil >>>>>> >>>>>> @independentid >>>>>> www.independentid.com <http://www.independentid.com/> >>>>>> [email protected] <mailto:[email protected]> >>>>>> >>>>>> > On Nov 24, 2015, at 12:05 PM, [email protected] >>>>>> > <mailto:[email protected]> wrote: >>>>>> > >>>>>> > >>>>>> > A New Internet-Draft is available from the on-line Internet-Drafts >>>>>> > directories. >>>>>> > This draft is a work item of the Web Authorization Protocol Working >>>>>> > Group of the IETF. >>>>>> > >>>>>> > Title : OAuth 2.0 Proof-of-Possession (PoP) Security >>>>>> > Architecture >>>>>> > Authors : Phil Hunt >>>>>> > Justin Richer >>>>>> > William Mills >>>>>> > Prateek Mishra >>>>>> > Hannes Tschofenig >>>>>> > Filename : draft-ietf-oauth-pop-architecture-06.txt >>>>>> > Pages : 23 >>>>>> > Date : 2015-11-24 >>>>>> > >>>>>> > Abstract: >>>>>> > The OAuth 2.0 bearer token specification, as defined in RFC 6750, >>>>>> > allows any party in possession of a bearer token (a "bearer") to get >>>>>> > access to the associated resources (without demonstrating possession >>>>>> > of a cryptographic key). To prevent misuse, bearer tokens must be >>>>>> > protected from disclosure in transit and at rest. >>>>>> > >>>>>> > Some scenarios demand additional security protection whereby a client >>>>>> > needs to demonstrate possession of cryptographic keying material when >>>>>> > accessing a protected resource. This document motivates the >>>>>> > development of the OAuth 2.0 proof-of-possession security mechanism. >>>>>> > >>>>>> > >>>>>> > The IETF datatracker status page for this draft is: >>>>>> > https://datatracker.ietf.org/doc/draft-ietf-oauth-pop-architecture/ >>>>>> > <https://datatracker.ietf.org/doc/draft-ietf-oauth-pop-architecture/> >>>>>> > >>>>>> > There's also a htmlized version available at: >>>>>> > https://tools.ietf.org/html/draft-ietf-oauth-pop-architecture-06 >>>>>> > <https://tools.ietf.org/html/draft-ietf-oauth-pop-architecture-06> >>>>>> > >>>>>> > A diff from the previous version is available at: >>>>>> > https://www.ietf.org/rfcdiff?url2=draft-ietf-oauth-pop-architecture-06 >>>>>> > <https://www.ietf.org/rfcdiff?url2=draft-ietf-oauth-pop-architecture-06> >>>>>> > >>>>>> > >>>>>> > Please note that it may take a couple of minutes from the time of >>>>>> > submission >>>>>> > until the htmlized version and diff are available at tools.ietf.org >>>>>> > <http://tools.ietf.org/>. >>>>>> > >>>>>> > Internet-Drafts are also available by anonymous FTP at: >>>>>> > ftp://ftp.ietf.org/internet-drafts/ >>>>>> > <ftp://ftp.ietf.org/internet-drafts/> >>>>>> > >>>>>> > _______________________________________________ >>>>>> > OAuth mailing list >>>>>> > [email protected] <mailto:[email protected]> >>>>>> > https://www.ietf.org/mailman/listinfo/oauth >>>>>> > <https://www.ietf.org/mailman/listinfo/oauth> >>>>>> >>>>>> _______________________________________________ >>>>>> OAuth mailing list >>>>>> [email protected] <mailto:[email protected]> >>>>>> https://www.ietf.org/mailman/listinfo/oauth >>>>>> <https://www.ietf.org/mailman/listinfo/oauth> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> <https://www.pingidentity.com/> >>>>>> Brian Campbell >>>>>> Distinguished Engineer >>>>>> Ping Identity >>>>>> @ [email protected] <mailto:[email protected]> >>>>>> +1 720.317.2061 <tel:%2B1%20720.317.2061> >>>>>> @pingidentity >>>>>> Connect with us! >>>>>> <https://www.pingidentity.com/> <https://www.pingidentity.com/> >>>>>> <https://ping.force.com/Support/PingIdentityCommunityHome> >>>>>> <https://ping.force.com/Support/PingIdentityCommunityHome> >>>>>> <http://www.glassdoor.com/Overview/Working-at-Ping-Identity-EI_IE380907.11,24.htm> >>>>>> <https://twitter.com/pingidentity> >>>>>> <https://www.youtube.com/user/PingIdentityTV> >>>>>> <https://www.linkedin.com/company/21870> >>>>>> <https://www.facebook.com/pingidentitypage> >>>>>> <https://plus.google.com/u/0/114266977739397708540> >>>>>> <http://www.slideshare.net/PingIdentity> <http://flip.it/vjBF7> >>>>>> <https://www.pingidentity.com/blogs/> >>>>> >>>>> >>>>> -- >>>>> <https://www.pingidentity.com/> >>>>> Brian Campbell >>>>> Distinguished Engineer >>>>> Ping Identity >>>>> @ [email protected] <mailto:[email protected]> >>>>> +1 720.317.2061 <tel:%2B1%20720.317.2061> >>>>> @pingidentity >>>>> Connect with us! >>>>> <https://www.pingidentity.com/> <https://www.pingidentity.com/> >>>>> <https://ping.force.com/Support/PingIdentityCommunityHome> >>>>> <https://ping.force.com/Support/PingIdentityCommunityHome> >>>>> <http://www.glassdoor.com/Overview/Working-at-Ping-Identity-EI_IE380907.11,24.htm> >>>>> <https://twitter.com/pingidentity> >>>>> <https://www.youtube.com/user/PingIdentityTV> >>>>> <https://www.linkedin.com/company/21870> >>>>> <https://www.facebook.com/pingidentitypage> >>>>> <https://plus.google.com/u/0/114266977739397708540> >>>>> <http://www.slideshare.net/PingIdentity> <http://flip.it/vjBF7> >>>>> <https://www.pingidentity.com/blogs/>_______________________________________________ >>>>> OAuth mailing list >>>>> [email protected] <mailto:[email protected]> >>>>> https://www.ietf.org/mailman/listinfo/oauth >>>>> <https://www.ietf.org/mailman/listinfo/oauth> >>>> >>> >> >> >> >> >> -- >> <https://www.pingidentity.com/> >> Brian Campbell >> Distinguished Engineer >> Ping Identity >> @ [email protected] <mailto:[email protected]> >> +1 720.317.2061 >> @pingidentity >> Connect with us! >> <https://www.pingidentity.com/> <https://www.pingidentity.com/> >> <https://ping.force.com/Support/PingIdentityCommunityHome> >> <https://ping.force.com/Support/PingIdentityCommunityHome> >> <http://www.glassdoor.com/Overview/Working-at-Ping-Identity-EI_IE380907.11,24.htm> >> <https://twitter.com/pingidentity> >> <https://www.youtube.com/user/PingIdentityTV> >> <https://www.linkedin.com/company/21870> >> <https://www.facebook.com/pingidentitypage> >> <https://plus.google.com/u/0/114266977739397708540> >> <http://www.slideshare.net/PingIdentity> <http://flip.it/vjBF7> >> <https://www.pingidentity.com/blogs/>
_______________________________________________ OAuth mailing list [email protected] https://www.ietf.org/mailman/listinfo/oauth
