Quite a few people don't make the connection on that graph in particular!
Tony Guadagno via observium wrote on 2023-12-04 20:42:
Aahhh…. Milli-errors… LOL how could I have missed that…
Ok, that clears that up, thanks!
Tony Guadagno
O +1 585 577 1003
C +1 585 703 6700
E [email protected] <mailto:[email protected]>
cid:[email protected]
*From:*Adam Armstrong via observium <[email protected]>
*Sent:* Monday, December 4, 2023 3:35 PM
*To:* Tony Guadagno via observium <[email protected]>
*Cc:* Adam Armstrong <[email protected]>
*Subject:* [Observium] Re: units on error graphs?
The graph is showing a rate, so it's errors per second, or 44
milli-errors per second or something like 13 errors in the 5 minute
poller period.
adam.
Tony Guadagno via observium wrote on 2023-12-04 19:46:
Just for reference, this is the “show interface” for the port in
the graph…I understand that “show interface” shows a cumulative
number while the graph is not….but as you can see, there have been
1241 input errors since the last reset…..that is no where near 44m?
Hence my confusion
thanks
GigabitEthernet0/0 is up, line protocol is up
Hardware is CN Gigabit Ethernet, address is 68ef.bd99.dca0 (bia
68ef.bd99.dca0 )
Description: lan
Internet address is 1.1.1.1/24
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 2/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full Duplex, 1Gbps, media type is RJ45
output flow-control is unsupported, input flow-control is
unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/13/11228 (size/max/drops/flushes); Total
output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 954000 bits/sec, 535 packets/sec
5 minute output rate 8346000 bits/sec, 885 packets/sec
3637522994 packets input, 1559853723 bytes, 0 no buffer
Received 11917322 broadcasts (0 IP multicasts)
0 runts, 0 giants, 1 throttles
1241 input errors, 0 CRC, 0 frame, 1241 overrun, 0 ignored
0 watchdog, 177941 multicast, 0 pause input
322101698 packets output, 1529083260 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
403 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Tony Guadagno
O +1 585 577 1003
C +1 585 703 6700
E [email protected] <mailto:[email protected]>
cid:[email protected]
*From:* Tony Guadagno via observium
<[email protected]>
<mailto:[email protected]>
*Sent:* Monday, December 4, 2023 2:12 PM
*To:* Observium <[email protected]>
<mailto:[email protected]>
*Cc:* Tony Guadagno <[email protected]> <mailto:[email protected]>
*Subject:* [Observium] units on error graphs?
Hi, sorry if this is obvious, but it just occurred to me that I
don’t understand this graph. This comes from an Ethernet port on
a cisco router….
What are the units??for example the “last in errors/s” is
44.25m???? 44.24 million? That can’t be right.
Thanks in advance
Tony Guadagno
O +1 585 577 1003
C +1 585 703 6700
E [email protected] <mailto:[email protected]>
cid:[email protected]
_______________________________________________
observium mailing list [email protected]
<mailto:[email protected]>
To unsubscribe send an email [email protected]
<mailto:[email protected]>
_______________________________________________
observium mailing list -- [email protected]
To unsubscribe send an email to [email protected]
_______________________________________________
observium mailing list -- [email protected]
To unsubscribe send an email to [email protected]
