In the SNMP config for that specific device, try tuning the "Maxrep"
setting and poll manually comparing the times.
This Often needs tweaking to be something device specific for best
performance - I even have multiple devices of the exact same
make/model/etc, which each need different maxrep values.
Regards,
James Tandy
TandyUK Servers Limited
Tel: 01903 247 011
Www: http://www.tandyukservers.co.uk
Email: [email protected]
TandyUK Servers Limited Registered in England and Wales, Company number 8314911
VAT Registered in the UK, number 182 0661 19
Registered Office: Amelia House, Crescent Road, Worthing, BN11 1QR
On 18/03/2024 15:37, Stefan Schmidt via observium wrote:
Hello Admin,
thank you for the 3 points, to which we would like to respond in order to
further assess the problem:
1. The poller hardware currently only queries this one Mikrotik router beside
19 other devices behind. There is a load, this one router is displayed with
“Last Polled” 100% and 204.19s. So is the server overloaded?
2. We have total 20 devices, 16 threads and 1 wrapper. How can we expand the
processes? Minimum allowed warpper process is set to “4”. We only see one at a
time.
3. In parallel to the router in question, other routers, switches, APs are
queried (19) in the same network, where these problems do not occur. Why?
On one router we have traffic of 10-100 Mbit/s on each 4 ports (interfaces)
that we can see. Is it possible that the Mikrotik hardware processes the SNMP
query too slowly? Our SNMP Access goes via a 5th unused line, not effected with
internet traffic. Has anyone had similar experiences with Mikrotik and the
CCR2004-16G-2S+ model?
If this problem stays: Is there a way to individually change the polling time
to 10 or 20 minutes for certain devices? Could be ok for uns ...
Grüße
Stefan
_______________________________________________
observium mailing list -- [email protected]
To unsubscribe send an email to [email protected]
_______________________________________________
observium mailing list -- [email protected]
To unsubscribe send an email to [email protected]
