That means your cluster service has not started. Refer to
the user's guide for more.

Andy Johnson wrote:
*Sunil Mushran,
  Are you sure ?

Before and **after**
" service hearbeat start"
I have the **same** results; heartbeat user space is not mentioned; This is on fedora core 6.

here is what I get:
*cat /etc/sysconfig/o2cb
#
# This is a configuration file for automatic startup of the O2CB
# driver.  It is generated by running /etc/init.d/o2cb configure.
# Please use that method to modify this file
#

# O2CB_ENABELED: 'true' means to load the driver on boot.
O2CB_ENABLED=false

# O2CB_BOOTCLUSTER: If not empty, the name of a cluster to start.
O2CB_BOOTCLUSTER=

# O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
O2CB_HEARTBEAT_THRESHOLD=

Regards,
Andy


On 3/28/07, *Sunil Mushran* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:

    He meant... cat /etc/sysconfig/o2cb
    If you are using novell's userspace hb, then it will be listed there.

    Andy Johnson wrote:
    > Hello,
    > NO such thing as /sys/o2cb/heartbeat_mode !
    > I tried :
    >
    >  /etc/init.d/o2cb load
    > Loading module "configfs": OK
    > Mounting configfs filesystem at /sys/kernel/config: OK
    > Loading module "ocfs2_nodemanager": OK
    > Loading module "ocfs2_dlm": OK
    > Loading module "ocfs2_dlmfs": OK
    > Mounting ocfs2_dlmfs filesystem at /dlm: OK
    >
    >  :/root# ls /sys/o2cb
    > interface_revision  logmask
    > and
    >
    > ls  /sys/o2cb/logmask
    > ls /sys/o2cb/logmask -al
    > total 0
    > drwxr-xr-x 2 root root    0 Mar 28 19:28 .
    > drwxr-xr-x 3 root root    0 Mar 28 19:26 ..
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 AIO
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 BH_IO
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 CONN
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DCACHE
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DISK_ALLOC
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_DOMAIN
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLMFS
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_GLUE
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_MASTER
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_RECOVERY
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 DLM_THREAD
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 ENTRY
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 ERROR
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXIT
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXPORT
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 EXTENT_MAP
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 FILE_IO
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 HB_BIO
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 HEARTBEAT
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 INODE
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 JOURNAL
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 KTHREAD
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 MSG
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 NAMEI
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 NOTICE
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 QUORUM
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 SOCKET
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 SUPER
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 TCP
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 UPTODATE
    > -rw-r--r-- 1 root root 4096 Mar 28 19:28 VOTE
    >
    > and
    >
    > cat /sys/o2cb/logmask/HEARTBEAT
    > off
    > Regards,
    > Andy
    >
    >
    >
    > On 3/28/07, *Srinivas Eeda* < [EMAIL PROTECTED]
    <mailto:[EMAIL PROTECTED]>
    > <mailto:[EMAIL PROTECTED]
    <mailto:[EMAIL PROTECTED]> >> wrote:
    >
    >     That might because you have configured user mode dlm. What
    does "|cat
    >     /sys/o2cb/heartbeat_mode" show, "user"?. If so run,
    /etc/init.d/o2cb
    >     configure and answer "n" for the following
    >     ||Use user-space driven heartbeat? (y/n) [y] n
    >
    >     thanks,
    >     --Srini
    >     ||
    >
    >     |Andy Johnson wrote:
    >     > Hello,
    >     > I have ocfs2-tools-1.2.3 . ( built from sources)
    >     > I try:
    >     >  mount /dev/vg1/cluster /mnt/ocfs2/
    >     > and get:
    >     > ocfs2_hb_ctl: Unable to access cluster service while starting
    >     heartbeat
    >     > mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl:
    >     > "Operation not permitted"
    >     >
    >     > What can be the cause of this error ? Any ideas?
    >     >
    >     > (I tried it after service heartbeat stop)
    >     >
    >     > Regards,
    >     > Andy
    >     >
> ------------------------------------------------------------------------

    >     >
    >     > _______________________________________________
    >     > Ocfs2-devel mailing list
    >     > [email protected]
    <mailto:[email protected]> <mailto:
    [email protected] <mailto:[email protected]>>
    >     > http://oss.oracle.com/mailman/listinfo/ocfs2-devel
    >
    >
    >
    ------------------------------------------------------------------------
    >
    > _______________________________________________
    > Ocfs2-devel mailing list
    > [email protected] <mailto:[email protected]>
    > http://oss.oracle.com/mailman/listinfo/ocfs2-devel


------------------------------------------------------------------------

_______________________________________________
Ocfs2-devel mailing list
[email protected]
http://oss.oracle.com/mailman/listinfo/ocfs2-devel

_______________________________________________
Ocfs2-devel mailing list
[email protected]
http://oss.oracle.com/mailman/listinfo/ocfs2-devel

Reply via email to