Remove vip and mount on both. See if that helps. Vaidya, Sachin wrote: > > Hi, > Tried both public and private ip addreses but still not able to mount > device on both nodes. > Here are my configuration details. > hosts file : same on both nodes. > > 127.0.0.1 localhost.localdomain localhost > 172.18.11.12 acspittdw001 acspittdw001.servicemetrics.net > 172.18.22.1 priv-acspittdw001 > 172.18.11.24 vip-acspittdw001 > 172.18.11.13 acspittdw002 acspittdw002.servicemetrics.net > 172.18.22.2 priv-acspittdw002 > 172.18.11.25 vip-acspittdw002 > > The cluster.conf on both nodes looks same as > node: > ip_port = 7777 > ip_address = 172.18.11.12 > number = 0 > name = acspittdw001 > cluster = ocfs2 > > node: > ip_port = 7777 > ip_address = 172.18.11.13 > number = 1 > name = acspittdw002 > cluster = ocfs2 > > cluster: > node_count = 2 > name = ocfs2 > > Both nodes can ping each other on public and private ips. > The mount command produces following error on node 2 when device is > already mounted on node 1. > > [EMAIL PROTECTED] ~]# mount -t ocfs2 /dev/md0 /crs1 > mount.ocfs2: Transport endpoint is not connected while mounting > /dev/md0 on /crs1 > [EMAIL PROTECTED] ~]# > > dmesg show following messages > > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > (5027,2):ocfs2_initialize_super:1354 max_slots for this device: 8 > (5027,2):ocfs2_fill_local_node_info:1031 I am node 1 > (4986,2):o2net_connect_expired:1446 ERROR: no connection established > with node 0 after 10 seconds, giving up and returning errors. > > (5027,2):dlm_request_join:771 ERROR: status = -107 > (5027,2):dlm_try_to_join_domain:919 ERROR: status = -107 > (5027,2):dlm_join_domain:1164 ERROR: status = -107 > (5027,2):dlm_register_domain:1354 ERROR: status = -107 > (5027,2):ocfs2_dlm_init:1996 ERROR: status = -107 > (5027,2):ocfs2_mount_volume:1063 ERROR: status = -107 > ocfs2: Unmounting device (9,0) on (node 1) > [EMAIL PROTECTED] ~]# > > Any idea why this is happening ? > I can provide more details if needed. > Any help will be greatly appreciated. > Thanks in advance. > - Sachin Vaidya. > > > > -----Original Message----- > From: Sunil Mushran > To: Vaidya, Sachin > Cc: 'ocfs2-users@oss.oracle.com' > Sent: 3/29/2006 7:16 PM > Subject: Re: [Ocfs2-users] Getting eI am using RHLError when mounting > shared OCFS2 device. > > Connection failiure. Check dmesg. > > Mount triggers the heartbeat thread which triggers the o2net > to make a connection to all heartbeating nodes. If this connection > fails, > the mount fails. (The larger node number initiates the connection > to the lower node number.) > > Obvious error would be incorrect ipaddr specified in cluster.conf. > Error messages in /var/log/messsages on both nodes will > provide more clues. > > Vaidya, Sachin wrote: > > > > Hi, > > > > I am using RHLE4 2.6.9-34.Elsmp with OCFS2 1.2. > > > > The h/w for this 2 node cluster is connected correctly. > > > > After loading ocfs2 on both nodes, the shared device could only be > > mounted on one node. When I try to mount same shared device on second > > node then I get following error. > > > > Mount.ocfs2: Transport endpoint is not connected while mounting > > /dev/md0 on /crs1 > > > > Any idea, why this is happening ? > > > > Any help will be highly appreciated. > > > > Thanks, > > > > Sachin Vaidya > > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Ocfs2-users mailing list > > Ocfs2-users@oss.oracle.com > > http://oss.oracle.com/mailman/listinfo/ocfs2-users > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Ocfs2-users mailing list > Ocfs2-users@oss.oracle.com > http://oss.oracle.com/mailman/listinfo/ocfs2-users >
_______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
