Guys,
Finally the problem is resolved.
From the tcpdump, my sysadmin could figure out that something was blocking the connection to go through from one node to the other.
It was found that there was some kind of firewall process running on both nodes, which was blocking IPTables from being routed correctly.
Once that process was shutdown, the connection went through and the devices could be mounted as shared on both nodes at the same time. I will now install clusterware on these nodes to make progress towards 10g RAC solution.
Thanks to all of you who provided valuable suggestions and clues to resolve this problem.
Special thanks to Sunil Mushran for his insight into this product and prompt help !
Thanks and good night !
Sachin Vaidya
Infrastructure Management Senior Analyst
Affiliated Computer Services
-----Original Message-----
From: Sunil Mushran [mailto:[EMAIL PROTECTED]]
Sent: Thursday, March 30, 2006 8:58 PM
To: Vaidya, Sachin
Cc: '''[email protected]' ' '
Subject: Re: [Ocfs2-users] Getting eI am using RHLError when mounting shar ed OCFS2 device.
So, the connection is expiring. Hmmm...
1. cat /config/cluster/<clustername>/node/*/ipv4_address
Ensure the ips are correct. If you change the ips in cluster.conf,
you need to restart the cluster for the new values to take effect.
2. Enable tcpdump on that device and port on both nodes. See
if the connection request is can be tracked. It should be easy assuming
no other traffic on that interface between the nodes.
3. Ensure you are on ocfs2 1.2.0.
Vaidya, Sachin wrote:
_______________________________________________ Ocfs2-users mailing list [email protected] http://oss.oracle.com/mailman/listinfo/ocfs2-users
