|
Looks as you have 2 hosts on a SINGLE SCSI
controller bus. It is not recommended configuration (supported config is _head
controller, so
when one SCSI bus resets, another dont see
it).
Changing heartbeat counter allows OCFSv2 to survive
during bus reset, but it is not a good configuration anyway.
----- Original Message -----
Sent: Friday, September 22, 2006 11:45
AM
Subject: Re: [Ocfs2-users] ocfs2 fencing
on reboot of 2nd node
Thanks, this seemed to clear
the problem up, setting O2CB_HEARTBEAT_THRESHOLD to 31. Though I still
get the SCSI/multipath errors, the 1st node does not fence itself.
Sep 22 18:19:34 bbflgrid11 kernel:
SCSI error : <1 0 0 12> return code = 0x20000
Sep 22 18:19:34 bbflgrid11 kernel: end_request: I/O
error, dev sdab, sector 1920
Sep 22
18:19:34 bbflgrid11 kernel: device-mapper: dm-multipath: Failing path
65:176.
Sep 22 18:19:34 bbflgrid11
kernel: SCSI error : <1 0 0 14> return code = 0x20000
Sep 22 18:19:34 bbflgrid11 kernel: end_request: I/O
error, dev sdad, sector 1920
Sep 22
18:19:34 bbflgrid11 kernel: device-mapper: dm-multipath: Failing path
65:208.
Sep 22 18:19:34 bbflgrid11
kernel: SCSI error : <1 0 0 13> return code = 0x20000
Sep 22 18:19:34 bbflgrid11 kernel: end_request: I/O
error, dev sdac, sector 1920
Sep 22
18:19:34 bbflgrid11 kernel: device-mapper: dm-multipath: Failing path
65:192.
Sep 22 18:19:34 bbflgrid11
kernel: SCSI error : <1 0 0 13> return code = 0x20000
Sep 22 18:19:34 bbflgrid11 kernel: end_request: I/O
error, dev sdac, sector 192785
Sep 22
18:19:34 bbflgrid11 multipathd: 65:176: mark as failed
Sep 22 18:19:34 bbflgrid11 multipathd: mpath1:
remaining active paths: 1
Sep 22
18:19:34 bbflgrid11 multipathd: 65:208: mark as failed
Sep 22 18:19:34 bbflgrid11 multipathd: mpath3:
remaining active paths: 1
Sep 22
18:19:34 bbflgrid11 multipathd: 65:192: mark as failed
Sep 22 18:19:34 bbflgrid11 multipathd: mpath2:
remaining active paths: 1
Sep 22
18:19:44 bbflgrid11 multipathd: 65:176: readsector0 checker reports path is
up
Sep 22 18:19:44 bbflgrid11
multipathd: 65:176: reinstated
Sep 22
18:19:44 bbflgrid11 multipathd: mpath1: remaining active paths: 2
Sep 22 18:19:44 bbflgrid11 multipathd:
65:192: readsector0 checker reports path is up
Sep 22 18:19:44 bbflgrid11 multipathd: 65:192:
reinstated
Sep 22 18:19:44 bbflgrid11
multipathd: mpath2: remaining active paths: 2
Sep 22 18:19:44 bbflgrid11 multipathd: 65:208: readsector0 checker
reports path is up
Sep 22 18:19:44
bbflgrid11 multipathd: 65:208: reinstated
Sep 22 18:19:44 bbflgrid11 multipathd: mpath3: remaining active paths:
2
Shawn E. Ruff
Senior
Oracle DBA
Fiberlink Communications
Office: (215) 664-1737
Mobile:
(215) 237-9285
Fax: (215) 664-1737
The information transmitted is
intended only for the person or entity to which it is addressed and may
contain confidential and/or privileged material. Any review,
retransmission, dissemination or other use of, or taking of any action in
reliance upon, this information by persons or entities other than the intended
recipient is prohibited. If you received this in error, please contact
the sender and delete the material from any
computer.
Sunil Mushran
<[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
09/21/2006 08:04 PM
|
|
To
| [EMAIL PROTECTED]
|
|
cc
| [email protected]
|
|
Subject
| Re: [Ocfs2-users] ocfs2 fencing
on reboot of 2nd node |
|
What is your O2CB_HEARTBEAT_THRESHOLD set to?
For more,
refer:
http://oss.oracle.com/projects/ocfs2/dist/documentation/ocfs2_faq.html#HEARTBEAT
[EMAIL PROTECTED]
wrote:
>
> I'm performing some testing with ocfs2 on 2 nodes with
Red Hat AS4
> Update 4 (x86_64) and (mulitpath included in the 2.6
kernel) and am
> runing into some issues when cleanly rebooting the 2nd
node, while the
> 1st node is still up.
>
> So if I do the
following on the 2nd node, the 1st node does not fence
>
itself:
>
> /etc/init.d/ocfs2 stop
> /etc/init.d/o2cb
stop
> wait more than 60 seconds
> init 6
>
> I get
the following on the 1st node, but everything is fine:
>
> Sep 21
21:44:49 bbflgrid11 kernel: SCSI error : <0 0 0 12> return code
>
= 0x20000
> Sep 21 21:44:49 bbflgrid11 kernel: end_request: I/O error,
dev sdm,
> sector 1.
> Sep 21 21:44:49 bbflgrid11 kernel:
device-mapper: dm-multipath:
> Failing path 8:192.
> Sep 21
21:44:49 bbflgrid11 kernel: SCSI error : <0 0 0 14> return code
>
= 0x20000
> Sep 21 21:44:49 bbflgrid11 kernel: end_request: I/O error,
dev sdo,
> sector 193297
> Sep 21 21:44:49 bbflgrid11 kernel:
device-mapper: dm-multipath:
> Failing path 8:224.
> Sep 21
21:44:49 bbflgrid11 kernel: SCSI error : <0 0 0 13> return code
>
= 0x20000
> Sep 21 21:44:49 bbflgrid11 kernel: end_request: I/O error,
dev sdn,
> sector 192785
> Sep 21 21:44:49 bbflgrid11 kernel:
device-mapper: dm-multipath:
> Failing path 8:208.
> Sep 21
21:44:49 bbflgrid11 multipathd: 8:192: mark as failed
> Sep 21 21:44:49
bbflgrid11 multipathd: mpath1: remaining active paths: 1
> Sep 21
21:44:49 bbflgrid11 multipathd: 8:224: mark as failed
> Sep 21 21:44:49
bbflgrid11 multipathd: mpath3: remaining active paths: 1
> Sep 21
21:44:49 bbflgrid11 multipathd: 8:208: mark as failed
> Sep 21 21:44:49
bbflgrid11 multipathd: mpath2: remaining active paths: 1
> Sep 21
21:44:58 bbflgrid11 multipathd: 8:192: readsector0 checker
> reports
path is up
> Sep 21 21:44:58 bbflgrid11 multipathd: 8:192:
reinstated
> Sep 21 21:44:58 bbflgrid11 multipathd: mpath1: remaining
active paths: 2
> Sep 21 21:44:58 bbflgrid11 multipathd: 8:208:
readsector0 checker
> reports path is up
> Sep 21 21:44:58
bbflgrid11 multipathd: 8:208: reinstated
> Sep 21 21:44:58 bbflgrid11
multipathd: mpath2: remaining active paths: 2
> Sep 21 21:44:58
bbflgrid11 multipathd: 8:224: readsector0 checker
> reports path is
up
> Sep 21 21:44:58 bbflgrid11 multipathd: 8:224: reinstated
>
Sep 21 21:44:58 bbflgrid11 multipathd: mpath3: remaining active paths:
2
> Sep 21 21:46:06 bbflgrid11 kernel: SCSI error : <1 0 0 11>
return code
> = 0x20000
> Sep 21 21:46:06 bbflgrid11 kernel:
end_request: I/O error, dev sdaa,
> sector 1920
> Sep 21 21:46:06
bbflgrid11 kernel: device-mapper: dm-multipath:
> Failing path
65:160.
> Sep 21 21:46:06 bbflgrid11 multipathd: 65:160: mark as
failed
> Sep 21 21:46:06 bbflgrid11 multipathd: mpath0: remaining active
paths: 1
> Sep 21 21:46:06 bbflgrid11 multipathd: 65:160: readsector0
checker
> reports path is up
> Sep 21 21:46:06 bbflgrid11
multipathd: 65:160: reinstated
> Sep 21 21:46:06 bbflgrid11 multipathd:
mpath0: remaining active paths: 2
>
>
>
> Now if I do
the following on the 2nd node, the 1st node fences itself
> (same as
above, except dont wait 60 seconds after o2cb stop)
>
>
/etc/init.d/ocfs2 stop
> /etc/init.d/o2cb stop
> init
6
>
> Node 1 logs the following and fences itself, I have to power
cycle the
> server to get it back, it doesn't reboot or shutdown just
hangs
>
> Sep 21 21:28:00 bbflgrid11 kernel: SCSI error : <0 0
0 13> return code
> = 0x20000
> Sep 21 21:28:00 bbflgrid11
kernel: end_request: I/O error, dev sdn,
> sector 192785
> Sep 21
21:28:00 bbflgrid11 kernel: device-mapper: dm-multipath:
> Failing path
8:208.
> Sep 21 21:28:00 bbflgrid11 multipathd: 8:208: mark as
failed
> Sep 21 21:28:00 bbflgrid11 multipathd: mpath2: remaining active
paths: 1
> Sep 21 21:28:00 bbflgrid11 kernel: SCSI error : <1 0 0
12> return code
> = 0x20000
> Sep 21 21:28:00 bbflgrid11
kernel: end_request: I/O error, dev sdab,
> sector 192784
> Sep
21 21:28:00 bbflgrid11 kernel: end_request: I/O error, dev sdab,
>
sector 192786
> Sep 21 21:28:00 bbflgrid11 kernel: device-mapper:
dm-multipath:
> Failing path 65:176.
> Sep 21 21:28:00 bbflgrid11
kernel: SCSI error : <1 0 0 13> return code
> = 0x20000
>
Sep 21 21:28:00 bbflgrid11 kernel: end_request: I/O error, dev sdac,
>
sector 192785
> Sep 21 21:28:00 bbflgrid11 kernel: device-mapper:
dm-multipath:
> Failing path 65:192.
> Sep 21 21:28:00 bbflgrid11
multipathd: 65:176: mark as failed
> Sep 21 21:28:00 bbflgrid11
multipathd: mpath1: remaining active paths: 1
> Sep 21 21:28:01
bbflgrid11 multipathd: 65:192: mark as failed
> Sep 21 21:28:01
bbflgrid11 multipathd: mpath2: remaining active paths: 0
> Sep 21
21:28:01 bbflgrid11 kernel: (4912,1):o2hb_bio_end_io:331 ERROR:
> IO
Error -5
> Sep 21 21:28:01 bbflgrid11 kernel:
(4912,1):o2hb_do_disk_heartbeat:973
> ERROR: status = -5
> Sep 21
21:28:01 bbflgrid11 kernel: (4912,1):o2hb_bio_end_io:331 ERROR:
> IO
Error -5
> Sep 21 21:28:01 bbflgrid11 kernel:
(4912,1):o2hb_do_disk_heartbeat:973
> ERROR: status = -5
> Sep 21
21:28:01 bbflgrid11 multipathd: 65:176: readsector0 checker
> reports
path is up
> Sep 21 21:28:01 bbflgrid11 multipathd: 65:176:
reinstated
> Sep 21 21:28:01 bbflgrid11 multipathd: mpath1: remaining
active paths: 2
> Sep 21 21:28:03 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:03 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:03 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:03 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:05 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:05 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:05 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:05 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:07 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:07 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:07 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:07 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:09 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:09 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:09 bbflgrid11 kernel:
(4912,1):o2hb_bio_end_io:331 ERROR:
> IO Error -5
> Sep 21
21:28:09 bbflgrid11 kernel: (4912,1):o2hb_do_disk_heartbeat:973
>
ERROR: status = -5
> Sep 21 21:28:09 bbflgrid11 multipathd: 8:208:
readsector0 checker
> reports path is up
> Sep 21 21:28:09
bbflgrid11 multipathd: 8:208: reinstated
> Sep 21 21:28:09 bbflgrid11
multipathd: mpath2: remaining active paths: 1
> Sep 21 21:28:10
bbflgrid11 multipathd: 65:192: readsector0 checker
> reports path is
up
> Sep 21 21:28:10 bbflgrid11 multipathd: 65:192: reinstated
>
Sep 21 21:28:10 bbflgrid11 multipathd: mpath2: remaining active paths:
2
>
>
> ...
> Index 14: took 0 ms to do submit_bio for
read
> Index 15: took 0 ms to do waiting for read completion
>
(11,1):o2hb_stop_all_regions:1908 ERROR: stopping heartbeat on all
>
active regions
> Kernel panic - not syncing: ocfs2 is very sorry
to be fencing this
> system by panicing
>
>
> Seems
like if I wait for the node 1 to heartbeat to node 2, with o2c
> down,
before rebooting it's fine, but if I reboot before node 1 has
> had a
chance to hearbeat to node 2, with o2cb down, it's
panics.
>
>
>
> Shawn E. Ruff
> Senior Oracle
DBA
> Fiberlink Communications
>
> The information
transmitted is intended only for the person or entity
> to which it is
addressed and may contain confidential and/or
> privileged material.
Any review, retransmission, dissemination or
> other use of, or
taking of any action in reliance upon, this
> information by persons or
entities other than the intended recipient
> is prohibited. If
you received this in error, please contact the
> sender and delete the
material from any computer.
>
>
------------------------------------------------------------------------
>
>
_______________________________________________
> Ocfs2-users mailing
list
> [email protected]
>
http://oss.oracle.com/mailman/listinfo/ocfs2-users
>
_______________________________________________
Ocfs2-users mailing
list
[email protected]
http://oss.oracle.com/mailman/listinfo/ocfs2-users
_______________________________________________
Ocfs2-users mailing
list
[email protected]
http://oss.oracle.com/mailman/listinfo/ocfs2-users
|
