Hi,
Actually I was trying to use a different cluster.conf on the 3rd
(public only access) node. Sigh, I guess this is not possible and I
am in the process of purchasing a switch so that I can put all three
nodes on the same private network.
Thanks.
Susan
Begin forwarded message:
From: Sunil Mushran <[EMAIL PROTECTED]>
Date: August 24, 2007 2:59:00 PM MDT
To: Susan Wilson <[EMAIL PROTECTED]>
Cc: [email protected]
Subject: Re: [Ocfs2-users] Internal logic error adding node
cluster.conf should be exactly the same on all three nodes.
While private ip addresses should be used, public will also
work as long as the addresses are the same in all cluster.confs.
Also, o2cb_ctl is a bit picky as to the format of the file. As in,
it expects a newline between stanzas and the attributes need
to be after a tab.
Could you post the exact contents of the cluster.conf?
Susan Wilson wrote:
Hi,
I have a 2 node RAC cluster running SLES10-SP1 and a 3rd node also
running the same OS. The RAC servers communicate over a private
connection on a 10.1.1.x network. The 3rd node is to be a web
server, but is not currently connected to this private network.
Hence the cluster.conf is different on the 3rd node, in that the
ip addresses for the 2 RAC nodes are public and I'm not sure if
this is the cause of my problem. That is cluster.conf: on the 2
RAC nodes, 2 addresses private, one public; on the 3rd node 3
addresses public.
On the 3rd node, ocfs2console "sees" the files on the fiber that
the RAC nodes have mounted, but when I attempt to enable o2cb I
get errors. Here's the output of o2cb commands:
delphi3:/etc/init.d # ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster ocfs2: Offline
delphi3:/etc/init.d # ./o2cb enable
Writing O2CB configuration: OK
Starting O2CB cluster ocfs2: Failed
Cluster ocfs2 created
Node delphi1 added
Node delphi2 added
o2cb_ctl: Internal logic failure while adding node delphi3
Stopping O2CB cluster ocfs2: OK
Here's other pertinent information:
delphi3:/etc/init.d # rpm -qa | grep ocfs
ocfs2console-1.2.3-0.7
ocfs2-tools-1.2.3-0.7
ocfs2-tools-devel-1.2.3-0.7
delphi3:/etc/init.d # uname -a
Linux delphi3 2.6.16.46-0.14-smp #1 SMP Thu May 17 14:00:09 UTC
2007 i686 i686 i386 GNU/Linux
Thanks,
Susan
/Lovin' the baseball as long as the Yanks are winning./
/[awilson '07]/
---------------------------------------------------------------------
---
_______________________________________________
Ocfs2-users mailing list
[email protected]
http://oss.oracle.com/mailman/listinfo/ocfs2-users
_______________________________________________
Ocfs2-users mailing list
[email protected]
http://oss.oracle.com/mailman/listinfo/ocfs2-users
