I'm using ocfs2 on sles 10 (sp2)with user mode heartbeat on two node cluster.
ocfs2-tools-devel-1.4.0-0.5 ocfs2-tools-1.4.0-0.5 ocfs2console-1.4.0-0.5 heartbeat-2.1.4-0.4 heartbeat clustering is configured to use two separate network interfaces eth0 and eth1. iSCSI SAN is accessed via eth2 and eth3. on /etc/ocfs2/cluster.conf I have configured ocfs2 cluster nodes with addresses from interface eth0. What happens if interface eth0 (or switch behind it) goes down when cluster is on line? Do nodes still see others/heartbeat via eth1? Reason I'm asking this that during offline hardware maintenance network cable (eth) of second node was disconnected. And when I was trying to start cluster I cannot get ocfs2 up before I connected that cable. User mode heartbeat and other cluster services were working fine at same time with degraded network connections. Regards Petri Asikainen _______________________________________________ Ocfs2-users mailing list [email protected] http://oss.oracle.com/mailman/listinfo/ocfs2-users
