Hi, Check in /etc/ocfs2/cluster.conf the instance "number". For example, If you have two node:
node: ip_port = 7777 ip_address = 10.0.0.1 number = 0 <------------------------ name = priamus cluster = ocfs2 node: ip_port = 7777 ip_address = 10.0.0.2 number = 1 <----------------------------- name = hektor cluster = ocfs2 cluster: node_count = 2 name = ocfs2 ---------- Forwarded message ---------- From: Nandkumar Mane <nandkum...@gmail.com> Date: Wed, Sep 10, 2008 at 5:17 PM Subject: [Ocfs2-users] mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted". To: ocfs2-users@oss.oracle.com Hi, I am trying to configure a two node cluster on SLES10SP2 using user level heartbeat. Here is my configuration. ocfs2-tools-1.4.0-0.3 **user level heartbeat** -> lsmod | grep ocfs ocfs2_user_heartbeat 20992 1 ocfs2_dlmfs 37776 1 ocfs2_dlm 204456 1 ocfs2_dlmfs ocfs2_nodemanager 223384 6 ocfs2_user_heartbeat,ocfs2_dlmfs,ocfs2_dlm configfs 44700 3 ocfs2_user_heartbeat,ocfs2_nodemanager mounted filesystem list contains following two lines which are required for o2cb. configfs on /sys/kernel/config type configfs (rw) ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw) /etc/ocfs2/cluster.conf file is created on one node using ocfs2console and then propogated changes to other host. ->/etc/init.d/o2cb status Module "configfs": Loaded Filesystem "configfs": Mounted Module "ocfs2_nodemanager": Loaded Module "ocfs2_dlm": Loaded Module "ocfs2_dlmfs": Loaded Filesystem "ocfs2_dlmfs": Mounted Checking O2CB cluster ocfs2: Online Network idle timeout: 30000 Network keepalive delay: 2000 Network reconnect delay: 2000 Checking O2CB heartbeat: Not active Everything looks fine till this point. I am able to configure and start o2cb successfully. Now when I try to mount a ocfs2 filesystem, it give me following error. ->mount /dev/mapper/360a980004334637558344a7863755656 /hdmnt1 ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted" As per my opnion, I have followed proper stepts to configure. (I had done same with kernel level heartbeat successfully.) Is user level heartbeat supported in sles10sp2? Can somebody please give me some direction? Thanks Nand _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
_______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users