HELP. I installed v0.8.4-rc2 & Opie on a H5550. Everything seems to be fine, except for when I go to perform a shutdown, the meter on the screen indicates a 100% completion, but everything else is frozen. I cannot do anything except unplug the battery. In order to get it working again, I had to do a reset and connect to a serial cable then run boot to start Linux again. That was the first time....
The second time, I decided to perform another shutdown to make sure what I experienced was real. It happened again. The iPAQ was frozen after I clicked on shutdown. I went through the reset and connected to the serial cable, booted at the console prompt again. This time, the only thing shown on the iPAQ screen was the Penguin icon and some ........ I let it sit there for a long time then decided to turn it off/unplug the battery and try it again. After that I could not reset, nor access the console via the serial or anything at all. The iPAQ seems to be dead. There isn't a response no matter what I do to it. Any advice? Thanks, Tom _______________________________________________ Oe mailing list [email protected] https://www.handhelds.org/mailman/listinfo/oe
