Originally From:
http://www.siteexperts.com/forums/viewConverse.asp?d_id=18918
 
Windows Xp

does anyone know how to crack windows xp. i mean use some one elses disk and have it work with out locking up after 30 days.

Started By MBall33 on Mar 22, 2006 at 7:31:00 PM

2 Response(s) | Reply

Earlier Replies | Replies 1 to 2 of 2 | Later Replies
MHenke on Mar 23, 2006 at 12:15:48 AM (# 1)
This message has been edited.

WTF?

Did you misread the name of this community? It's SiteExperts.com, not L33tGangstaHaX0rs.vu (tho I admit they sound very similar).

Do you give even a flying fart what the site is about where you post your request for support in a punbishabe act?
Feel free to transcribe this on a notepad (in bold letters, best mirror-inverted, but I fear that will overcharge your skills) and pin it on your forehead:

"Our mission is to provide the site expert with comprehensive coverage on building, designing, and maintaining web sites and web applications."

That information is easily accessible through thew "Site Information" menu on the homepage.

To sum it up: You'll never get that kind of "help" on SiteExperts, go away, it's undesirable.


cdrom600 on Mar 25, 2006 at 3:16:54 PM (# 2)

You'll need to set up what hackers call an "activation spoofing charge". Be aware, however, that this will invlove opening up your computer, and will void your warranty.

Ok, let's get started! You'll need the following things:

  • Iron oxide (aka Fe2O3 or rust, like from an old car / see here)
  • Powdered aluminum metal (available at some paint stores / see here)
You will need roughly 3 grams of iron oxide (rust) and 1 gram of aluminum.

Mix them together in a thin paper tube, about 1/4 inch in diameter and 1 inch long. Be sure the ingredients are completely mixed.

Next, take a thin piece of wire (about 24 gauge), and about 4 inches long. Remove the insulation. Push the wire through the tube we made above, without letting the mixture escape. Place a small piece of tape on each end of the tube to keep the mixture inside.

Unplug your computer before proceeding

OK, thus far you should have a cigarette-looking thing, except shorter and with an inch of wire coming out of each end.

Open your computer. Find the power cable going to the CD drive you will be installing Windows from. Remove the insluation from the red and black* wires, and put our activation spoofing charge between them, with one wire conencted to the red and the other wire connected to the black.
*There may be 2 black wires. It doesn't matter which one you use.

There you go! Put your computer back together, plug it in, and enjoy the show!


References:
http://www.formfactors.org/FFDetail.asp?FFID=1&CatID=1
http://en.wikipedia.org/wiki/Thermite
http://en.wikibooks.org/wiki/Chemical_synthesis:Thermite_synthesis

Note: I'm not responsible if this messes up your computer somehow.

_______________________________________________
Offtopic mailing list
[email protected]
http://ns3.123.co.nz/mailman/listinfo/offtopic

Reply via email to