Andrzej Zaborowski ha scritto:
Hi,
2009/10/19 Denis Kenzior <[email protected]>:
I just got a Openmoko FreeRunner and I wonder how oFono can talk with it.
Use ser2net, but how? Can someone help on some simple steps or
instructions? Thanks a lot! By the way, the OS installed in it is Android
Cupcake. Need I change to other OS?
There are a couple of ways:
- Cross compile oFono itself to run directly on the device using the
calypso
driver.
- Cross compile ser2net, but run oFono on the desktop using the phonesim
driver.
Either way you will need the cross compiler and toolchain here:
http://wiki.openmoko.org/wiki/Toolchain
Note that my device came stock with the OpenMoko rootfs, so I have no
experience with Android.
For ser2net:
- Cross compile ser2net using the supplied toolchain, I don't remember
exactly, but I think this will get you there: ./configure --prefix=/usr --
sysconfdir=/etc --host=arm-angstrom-linux-gnueabi
You can possibly avoid the cross compiling if you're going to run
oFono on PC anyway, by using netcat instead of ser2net. Either
"netcat" or "nc" is usually in the packages repo of any distribution.
The command would be
# nc -l -p 2000 < /dev/ttySAC0 > /dev/ttySAC0
All other steps would be same as Denis outlined.
If you find that the port is spitting corrupt data, it's probably not
initialised. I use picocom to initialise ttys, it's:
# picocom /dev/ttySAC0
then ^a^q to quit picocom without resetting the port and then re-run nc.
Regards
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono
Hi all,
I'm the project leader of a new Freerunner distribution which claims to
be AT MOST a stable telephone instead of replicate all the other
distributions who claim to port the desktop-style distribution paradigm
to the Freerunner. In this way of think we planned to use oFono as the
main telephone stack because, following the mailing list since the
starting of the project, I believe oFono is a very well planned and
developed platform.
At the moment I am able to cross compile oFono with my toolchain and it
works quite well on my Freerunner so if someone needs a tarball with
ofonod and everything "make install" produces I can provide them without
problems :)
Thank you very much for your great work good bye.
Dario.
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono
