On Tue, Aug 17, 2010 at 10:45 PM, Denis Kenzior <[email protected]> wrote: > > > I'm trying to connect with a Huawei E226, but I'm getting > > different behavior whether I start ofonod with the modem (USB) plugged > > in or not: > > > > Scenario 1: > > > > 1 - start ofonod > > 2 - plug the modem > > 3 - not working > > > > Log: huawei-connected.log (attached) > > > > Scenario 2: > > > > 1 - start ofonod > > 2 - plug the modem > > 3 - call disable-modem > > 4 - call enable-modem > > 5 - it works > > > > Log: huawei-testscripts.log > > > > Scenario 3: > > > > 1 - plug the modem > > 2 - start ofonod > > 3 - it works > > > > Log file: huawei-not-connected.log > > > > I'm testing with MeeGo, ofono from git and connman 0.57. > > The problem with the failed cases it that oFono / ConnMan combination is > simply too fast. It tries to access the Modem before it had the chance > to properly initialize the SIM card. We have pushed some fixes upstream > after the 0.26 release that should alleviate this.
Thanks for the response. You are right, I can reproduce the problem even with connman turned off, by calling the test scripts before the modem is ready. I'm using both ofono and connman from git, with all the available updates so far. Does it mean that the fixes didn't solved the issue in my case? Could you point me to the patches? Thanks, Thiago _______________________________________________ ofono mailing list [email protected] http://lists.ofono.org/listinfo/ofono
