Hi Steven, > >>>> NO, just as the above have said ,we only negotiate two options, it's ok > >>>> for our PPP stack and it runs correctly. > >>> Then I'm confused. What is your concern here? :) > >> currently, we worked on a Qualcomm CDMA chip, and it worked on a Relay > >> mode, just relay the air PPP packet to host, and in Ofono we should > >> support PFC to satisfy the spec (Sprint Spec.), But Ofono does not > >> support PFC, so comes this question. > >> > >> From my personal point, Ofono should support PFC. > > > > as you might have clearly figured from Denis and my responses, our PPP > > code was designed to talk to a modem, not a network. > > > > We don't want to implement a full blown PPP stack with all nasty > > features. If this is needed for CDMA, because they push the PPP frames > > over the air, then actually getting the kernel PPP frame processing > > hooked up to our LCP and IPIP userspace code is the right thing to do > > here. > > > > At the moment we are not really putting additional energy into PPP since > > it is a dying protocol in the GSM world. The networks never required it > > I got it. > > > and the modem hardware/firmware moves over to highspeed direct IP > > interfaces. > > I like to know this tech, is there any spec on this topic?
check oFono's Ericsson MBM or Option HSO support. Or Google for it. Regards Marcel _______________________________________________ ofono mailing list [email protected] http://lists.ofono.org/listinfo/ofono
