Hi andrzej,

> 
> On 20 October 2010 15:21, Pekka Pessi <[email protected]> wrote:
> > 2010/10/19 Denis Kenzior <[email protected]>:
> >> Unfortunately some modems report CPIN: READY even though they're not
> >> ready.  The only reliable way to poll for this is to poll the IMSI,
> then
> >> the phonebook and the sms store and report ready only once all of
> them
> >> can be manipulated.
> >
> > I seems to me that Caiwen is proposing SIM presence polling. Each and
> > every modem does it now separately. Unfortunately this seems to be
> > even trickier than PIN lock polling, at least MBM returns different
> > error codes depending on how far its own initialization has got.
> 
> My MBM seems to only detect the SIM if it is inserted during the modem
> enumeration (on USB or PCI).  If you there's no SIM during modem
> initialisation, or you extract the SIM, then inserting a new SIM is
> never detected, the modem will always return "SIM not inserted" until
> reset.

Yes, most modem don't support dynamic detect SIM. 

> 
> Caiwen, have you looked at drivers/atmodem/sim-poll.c?
> 

I have read drivers/atmodem/sim-poll.c. It looks very good. 

I have two questions.
1. It seems it depends on the invoking of ofono_sim_register to trigger the SIM 
status
Polling. I'm not sure whether it is allowed to register the APIs(invoke 
ofono_sim_register) 
before make sure the SIM is inserted. 
2. According to the modems that I used previously, it seems it is required to 
send profile 
to SIM before fetch the first STK command. It just my guess, I don't test it. 
If it's wrong,
please correct me.

Here I suggest put STK initialization(fetch the SET UP MENU command) in SIM 
state watch, 
Because it is also required to fetch SET UP MENU command after unblock PIN or 
REFRESH 
Proactive command.


Thanks!

Caiwen





_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono

Reply via email to