On Di, Dez 28, 2010 at 09:01:20 -0800, Marcel Holtmann wrote:
> Hi Neil,
>
> > doc/calypso-modem.txt | 22 ++++++++++++++++++++++
> > 1 files changed, 22 insertions(+), 0 deletions(-)
> > create mode 100644 doc/calypso-modem.txt
> >
> > diff --git a/doc/calypso-modem.txt b/doc/calypso-modem.txt
> > new file mode 100644
> > index 0000000..ea3e0bb
> > --- /dev/null
> > +++ b/doc/calypso-modem.txt
> > @@ -0,0 +1,22 @@
> > +Calypso modem usage
> > +===================
> > +
> > +On the Openmoko Freerunner phone, the Calypso modem is presented by
> > +the kernel as serial device /dev/ttySAC0. To allow Ofono to
>
> it is spelled oFono.
>
> > +autodetect and use this, a simple udev rule is needed:
> > +
> > +KERNEL=="ttySAC0", ENV{OFONO_DRIVER}="calypso"
> > +
> > +You can put this in any file in /lib/udev/rules.d. A logical choice
> > +is the "55-openmoko-gta01-gta02.rules" file, if it exists in your
> > +Freerunner distribution.
> > +
> > +With this rule in place:
> > +
> > +- ofono will detect the Calypso modem when it starts up, and the
>
> Same here. It is oFono.
>
> > + `list-modems' test script will show this, but will not power it up
> > +
> > +- the `enable-modem' test script can be used to power it up
> > +
> > +- a subsequent `list-modems' will show lots of information, including
> > + network registration.
>
> Since we had this discussion on IRC. Has this rule been proven to do the
> right thing? Even in case of the weird renaming of the original serial
> port?
>
> Regards
>
> Marcel
>
Approved!
Regards Frank
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono
