--- doc/dialup-command-set.txt | 45 ++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 45 insertions(+), 0 deletions(-) create mode 100644 doc/dialup-command-set.txt
diff --git a/doc/dialup-command-set.txt b/doc/dialup-command-set.txt new file mode 100644 index 0000000..a7a1df3 --- /dev/null +++ b/doc/dialup-command-set.txt @@ -0,0 +1,45 @@ +This document specifies the AT command set used in the bluetooth ofono plugins. + +Bluetooth Dial-up Networking Profile Features Description +========================================================= +(Ref. document: Dial-up Networking Profile - Bluetooth specification version 1.1 - 22 February 2001) + +- AT COMMAND SET USED: +Commands: + &C Circuit 109 (DCD) Control + &D Circuit 108 (DTR) Response + &F Set to Factory Defined Configuration + +GCAP Request Complete Capabilities List + +GMI Request Manufacturer Identification + +GMM Read Model Identification + +GMR Read Revision Identification + A Answer Incoming Call + D Dial + E Command Echo + H Hang Up + L Monitor Speaker Loudness + M Monitor Speaker Control + O Return to Online Data Mode + P Select Pulse Dialling + Q Result Code Suppression + S0 Automatic Answer Control + S10 Automatic Disconnect Delay Control + S3 Command Line Termination Character + S4 Response Formatting Character + S5 Command Line Editing Character (BACKSPACE) + S6 Blind Dial Delay Control + S7 Connection Completion Timeout + S8 Comma Dial Modifier Delay Control + T Select Tone Dialling + V DCE Response Format + X Call Progress Monitoring Control + Z Reset to Default Configuration +Result codes: + OK Acknowledge execution of a command + CONNECT Connection has been established + RING The DCE has detected an incoming call signal from network + NO CARRIER The connection has been terminated, or attempt to establish + a connection failed + ERROR Error + NO DIALTONE No dial-tone detected + BUSY Busy signal detected -- 1.7.1 _______________________________________________ ofono mailing list ofono@ofono.org http://lists.ofono.org/listinfo/ofono
