Hi Jussi, On 02/21/2011 03:46 AM, Jussi Kangas wrote: > Hi, > > On Fri, 2011-02-18 at 19:29 +0200, Denis Kenzior wrote: > >> I have pushed experimental patch >> e8553f53376a33504dd18c4d7bb6d6f309973e0a to take care of this. Let me >> know if this works for you. >> >> Regards, >> -Denis > > It seems to be showing the states correctly except in case when you make > PIN2 blocked using call meter API. If PIN2 goes blocked when using > callmeter nothing is shown in API. (My patch did not do that either. > Plan was to fix it in separate patch) >
Please do. Most modems do not support PIN2 entry via CPIN, and implement this using a vendor extension. PIN2 / PUK2 support seems to be a rather recent addition to the specs. > Another issue is that your patch brings the API:s down when PIN2 goes > blocked. ( using ChangePin ) That is not correct. Blocked PIN2 does not > force phone to drop from network and it does prevent the usage of SIM. > If your modem reports the PIN2 in CPIN, then yes that is a bug. > There seems to be also some problem when API shows PUK2 required and PIN > and PIN2 locked. Reset-pin opens the PUK2 but API does not get the > response it's looking for and oFono needs to be booted before states are > showed correctly again. I suspect that's a separate issue however and > not caused by this patch. > I'm having trouble visualizing this one. Can you provide an AT debug log to illustrate? Regards, -Denis _______________________________________________ ofono mailing list [email protected] http://lists.ofono.org/listinfo/ofono
