Hi Milan,
I'm not sure if you succeeded in the mean time.
we had a similar issue when we used the Fedora pre-installed pulseaudio
version.
When I downloaded and compiled the latest sources it wouked in our case.
Regards,
Andreas
[email protected] wrote on 11.03.2011 15:43:59:
> Hi Daniel,
>
> Thanks for the quick assistance.
>
> I tried the same approach as suggested by you.
>
> Steps:
> ------
> 1.$pacmd
> 2.$list-sources
> ( got 2 sources )
>
> name: <alsa_output.pci-0000_00_05.0.analog-stereo.monitor>
>
> (and)
>
> name: <alsa_input.pci-0000_00_05.0.analog-stereo>
> 3.$list-sinks
> ( got 1 sink )
>
> name: <alsa_output.pci-0000_00_05.0.analog-stereo>
>
> 4.created a shell script "ofono.sh" with contents as below:
> pactl load-module module-loopback source="alsa_input.pci-0000_00_05.
> 0.analog-stereo" sink="bluez_sink.A8_7E_33_AF_23_A4"
> pactl load-module module-loopback source="bluez_source.
> A8_7E_33_AF_23_A4" sink="alsa_output.pci-0000_00_05.0.analog-stereo"
> (A8_7E_33_AF_23_A4 is the BT address of handset paired to the host)
>
> 5. Now I connect the host to the handset through HFP.
> 6.After SLC is established , I dial a number and establish a voice call.
> 7.As soon as the state is "Playing" ( SCO connected) , I run the
> "ofono.sh" ( as mentioned in step 4).
>
> Result:
> -------
> I am getting the following errors:
>
> Failure: Module initalization failed
> Failure: Module initalization failed
>
>
> Requesting Clarification
> ------------------------
> 1.I was wondering if any modification is required in pulseaudio
> configuration files to enable dynamic loading of module-loopback.(
> e.g "module-loading = yes" in /etc/pulse/daemon.conf ).Currently all
> settings are maintained as default.
>
> 2.Also, do I need to modify "SCORouting=PCM" in "audio.conf" file.
> (default is HCI)
>
> It will be of great help to receive any further inputs regarding the
> above issue.
>
> Best Regards,
> Milan
>
> -----Original Message-----
> From: Daniel Wagner [mailto:[email protected]]
> Sent: Friday, March 11, 2011 12:52 PM
> To: Satpathy, Milan
> Cc: [email protected]
> Subject: Re: [HELP Required]Routing Of SCO data to BT Host Speaker
>
> Hi Milan,
>
> On Fri, Mar 11, 2011 at 10:56:34AM +0530, [email protected]
wrote:
> > Hi,
> >
> > Recently I have been trying to use Ofono to write a Handsfree
> based application( Using C on Ubuntu 10.10).
> > I am able to connect(SLC) to the AG using Ofono. After connection
> I am also successful in dialing to another number.
> > Bluetoothd indicates status as "Playing" ( SCO connection
> successful) once the call is established.
> >
> > Problem Faced:
> > ----------------------
> > However, after accepting the call I am unable to hear any voice
> through the speaker.
>
> You might have to loop back the PulseAudio BT source and sink to
> your sound card, e.g.
>
> pactl load-module module-loopback source="alsa_input.pci-0000_00_1b.
> 0.analog-stereo" sink="bluez_sink.78_47_1D_44_34_10"
> pactl load-module module-loopback source="bluez_source.
> 78_47_1D_44_34_10" sink="alsa_output.pci-0000_00_1b.0.analog-stereo"
>
> You have to do this within 5 seconds after the SCO connection has been
> established otherwise PulseAudio will suspend (which leads to a BT
> stream stop) the streams.
>
> HTH,
> daniel
>
>
> This message is for the designated recipient only and may contain
> privileged, proprietary, or otherwise private information. If you
> have received it in error, please notify the sender immediately and
> delete the original. Any other use of the email by you is prohibited.
> _______________________________________________
> ofono mailing list
> [email protected]
> http://lists.ofono.org/listinfo/ofono
Alpine Electronics R&D Europe GmbH, Vor dem Lauch 14, 70567 Stuttgart,
Registergericht Stuttgart, HRB 25265
Geschaeftsfuehrer: Hitoshi Kajiwara, Katsumi Miyake, Shigekazu Hori
Working office: Vor dem Lauch 14, 70567 Stuttgart
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono