Hi Gustavo, > > > I am trying to set up a simple HFP demonstrator using > > > BlueZ+oFono+PulseAudio, with a dbus client that coordinates the three of > > > them. Being a simple prototype, the goal is to see how they behave and > > > analyze how well it would all scale. > > > > > > The first question that arises is quite simple. In a multi-phone > > > scenario (all of them connected to our PC using Bluetooth HFP), oFono > > > properly lists all the phones as available modems. I would like to know > > > whether these modems can be associated to their underlying bluetooth > > > device (mac address, bluez device dbus path, or whatever). I have been > > > looking on the available modem properties but this seems not to be > > > present. Could somebody confirm this or otherwise explain how it can be > > > done? > > > > > > The purpose of my interest is that, depending on the use-case, the final > > > user would have to choose the modem (or device) manually. > > > > you would need to be a bit more specific on what the actual use case > > entails here. How would selection work and how the user is involved in > > it. Depending on that, things should be done differently. > > > > So besides that, some simple pieces that come to mind quickly are to > > create a HFP devinfo atom driver that just exports the BD_ADDR as serial > > number. > > Only the BD_ADDR is not enough, the device can paired with two or more > adapters. Exports its DBUS path seems a best option. > HFP plugin already keep the path for internal use, so its just a matter of put > it devinfo. > Also, the modem path gives you the information you need. The numbers there are > the adapter bd_addr followed by the remove device bd_add.
you can not get the BD_ADDR out of the device path. The device path is arbitrary. And if anybody considers to misuse it, then I will add even more random bits into it. Regards Marcel _______________________________________________ ofono mailing list [email protected] http://lists.ofono.org/listinfo/ofono
