Hi!
I've been looking at ofono for quite some time now. A couple of years ago I
wrote a lot of code to interface a GPRS modem. Now I need to do basically
the same again and I wonder if ofono would be a good idea to use.
The modem is not supported by ofono out of the box (no driver for it in the
tree).
First of all, I must say that I really miss some kind of "getting started"
information on the home page. Maybe I have just not found it. Is there such
a thing?
Second, the modem is a serial GPRS modem connected through a serial line.
This has to be farily common. Isn't there a simple way of just testing
ofono without adding udev rules, writing drivers, etc? What I would like is
basically to start ofonod with a path to the serial device, telling it to
use only standard (not device-specific) AT commands.
I don't think what I'd like to do is possible. So I added an udev rule in
the form of:
KERNEL=="ttyUSB*", ENV{OFONO_DRIVER}="nokia"
This gives me some indication that something happens when I start ofonod:
ofonod[21742]: plugins/udev.c:add_modem()
/devices/pci0000:00/0000:00:06.0/usb2/2-2/2-2:1.0/ttyUSB0/tty/ttyUSB0
(atmodem)
How do I proceed from here?
test/llist-modems gives me nothing.
Do the existing drivers check that the modem is actually a modem of that
type (nokia in this case)?
I am not looking for anything fancy. I basically only want to set up a GPRS
connection and maybe do operator selection.
No voice, no SMS, nothing more.
I tried this with the ofono-1.10 release.
Thanks,
Erik
_______________________________________________
ofono mailing list
[email protected]
http://lists.ofono.org/listinfo/ofono