Hi Yorn,
On 04/21/2016 08:37 PM, Yorn wrote:
> Hi Dragos
>
> Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
>> Hi Yarn,
>>
>> On 04/20/2016 07:54 PM, Yorn wrote:
>>> Hi Dragos,
>>>
>>> logs + comments inline
>>>
>>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>>> Hi Yorn,
>>>>
>>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>>> Hi Dragos,
>>>>>
>>>>> it is still active=0 :(
>>>>>
>>>>> root@colibri-vf:~/test# ./list-contexts
>>>>> [ /ublox_0 ]
>>>>> [ /ublox_0/context1 ]
>>>>> Username =
>>>>> AuthenticationMethod = chap
>>>>> Protocol = ip
>>>>> Name = Internet
>>>>> Settings = { }
>>>>> IPv6.Settings = { }
>>>>> Active = 0
>>>>> AccessPointName =
>>>>> Password =
>>>>> Type = internet
>>>>>
>>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>>>> and run the following scripts:
>>>>
>>>> enable-modem
>>>> online-modem
>>>> activate-context
>>>>
>>>> Then send the logs.
>>> Here they are [1]
>
> I am actually a bit lost in the ublox AT Commands manual..
>
> Do you have a chance to see something at the ofonod+AT logs with your
> expertice!?
>
oFono was able to register on the network an activate the context. This
part is interesting for you:
ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary()
cid 1
ofonod[369]: Aux: > AT\r
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: Aux: Finally woke up the modem
ofonod[369]: Aux: > AT+CGDCONT=1,"IP","m2m.tele2.com"\r
*> context defined
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
ofonod[369]: Aux: > AT+CGACT=1,1\r
*> context activated
ofonod[369]: Aux: < \r\nOK\r\n
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
ofonod[369]: Aux: > AT+CGCONTRDP=1\r
ofonod[369]: Aux: < \r\n+CREG: 5,"0000","00000010",4\r\n\r\n+CGEV: ME PDN ACT
1\r\n
ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 tech 4
ofonod[369]: src/gprs.c:netreg_status_changed() 5
ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
ofonod[369]: Aux: <
100.98.55.207.255.255.255.255","100.98.55.207","130.244.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
ofonod[369]: Aux: < \r\nOK\r\n
*> connection properties read successfully
ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property
NetworkInterface
> The connman cellular service is set to "a" (association) from starting
> connect cellular_240075810199181_context1
> up until timeout.
>
Do you still run the oFono scripts? From the logs it looks like connman
is trying to activate an already active context.
As a side note, oFono and ConnMan have persistent states for services and
contexts. They are stored under /var/lib/ofono|connman. When debugging I
found it useful sometimes to start with a clean state.
Thanks
--
Dragos Tatulea
Software Developer @ Endocode AG
[email protected]
Endocode AG, Brückenstraße 5A, 10179 Berlin
+49 30 1206 4472 | [email protected] | www.endocode.com
Vorstandsvorsitzender: Mirko Boehm
Vorstände: Dr. Thomas Fricke, Sebastian Sucker
Aufsichtsratsvorsitzende: Alexandra Boehm
Registergericht: Amtsgericht Charlottenburg - HRB 150748 B
_______________________________________________
ofono mailing list
[email protected]
https://lists.ofono.org/mailman/listinfo/ofono
