Il 12/05/2016 18:11, Denis Kenzior ha scritto:
There isn't an in-depth tutorial available unfortunately. If someone
wants to contribute it to the project, that would be appreciated.
I understand. If I will be able to complete my project I will try to
write a more detailed "use-case" manual - at least for the functions I
will use.
Modem must be powered & online in order to make calls.
So roughly:
test/enable-modem
test/online-modem
test/dial-number
test/hangup-call
Great! Following this procedure my phone made a call.
The last problem (I hope!) is there is no audio.
In the pulseaudio log attached, I see this error:
I: [pulseaudio] module.c: Loaded "module-switch-on-connect" (index:
#11; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index:
#12; argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #14;
argument: "headset=auto").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index:
#13; argument: "headset=auto").
I: [pulseaudio] main.c: Daemon startup complete.
I: [pulseaudio] card.c: Created 2 "bluez_card.08_FD_0E_5A_90_3B"
W: [pulseaudio] core-error.c: Unable to convert error string to
locale, filtering.
E: [pulseaudio] backend-ofono.c: Deferred setup failed on fd -1:
Transport endpoint is not connected
I googled without found something useful about.
Best regards
Marco
W: [pulseaudio] main.c: Running in system mode, but --disallow-exit not set.
W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading
not set.
N: [pulseaudio] main.c: Running in system mode, forcibly disabling SHM mode.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: Found user 'pulse' (UID 1002) and group 'pulse' (GID
1003).
W: [pulseaudio] caps.c: Normally all extra capabilities would be dropped now,
but that's impossible because PulseAudio was built without capabilities support.
I: [pulseaudio] main.c: Successfully changed user to "pulse".
I: [pulseaudio] main.c: This is PulseAudio 8.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is b1886a3027d3ec76e900519200000004.
I: [pulseaudio] main.c: Using runtime directory /var/run/pulse.
I: [pulseaudio] main.c: Using state directory /var/lib/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-8.0/modules.
I: [pulseaudio] main.c: Running in system mode: yes
W: [pulseaudio] main.c: OK, so you are running PA in system mode. Please note
that you most likely shouldn't be doing that.
W: [pulseaudio] main.c: If you do it nonetheless then it's your own fault if
things don't work as expected.
W: [pulseaudio] main.c: Please read
http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/
for an explanation why system mode is usually a bad idea.
W: [pulseaudio] pid.c: Stale PID file, overwriting.
I: [pulseaudio] main.c: System supports high resolution timers
I: [pulseaudio] cpu-arm.c: CPU flags: V6 V7 VFP EDSP NEON VFPV3
I: [pulseaudio] svolume_arm.c: Initialising ARM optimized volume functions.
I: [pulseaudio] sconv_neon.c: Initialising ARM NEON optimized conversions.
I: [pulseaudio] mix_neon.c: Initialising ARM NEON optimized mixing functions.
I: [pulseaudio] remap_neon.c: Initialising ARM NEON optimized remappers.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file
/usr/share/alsa/ucm/HP Webcam HD 2300/HP Webcam HD 2300.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for
card HP Webcam HD 2300
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HP Webcam HD 2300 use
case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HP Webcam HD 2300
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1:
Invalid argument
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or
directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
W: [pulseaudio] core-error.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file
or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such
file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such
file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such
file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such
file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such
file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such
file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or
directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,1: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,1: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,2
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,2: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,2
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,2: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,2
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,3
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,3: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,3
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,3: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,3
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,4
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,4: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,4
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,4: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,4
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,4: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,5
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,5
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,5
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,6
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,6
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,6
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,7
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,7
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1,7
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file
or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or
directory
I: [pulseaudio] card.c: Created 0
"alsa_card.usb-Hewlett_Packard_HP_Webcam_HD_2300-02"
I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or
directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] source.c: Created source 0
"alsa_input.usb-Hewlett_Packard_HP_Webcam_HD_2300-02.analog-stereo" with sample
spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HP Webcam HD 2300"
I: [pulseaudio] source.c: alsa.long_card_name = "Hewlett Packard HP Webcam
HD 2300 at usb-3f980000.usb-1.2, high speed"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path =
"platform-3f980000.usb-usb-0:1.2:1.2"
I: [pulseaudio] source.c: sysfs.path =
"/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/sound/card1"
I: [pulseaudio] source.c: udev.id =
"usb-Hewlett_Packard_HP_Webcam_HD_2300-02"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "03f0"
I: [pulseaudio] source.c: device.vendor.name = "Hewlett Packard"
I: [pulseaudio] source.c: device.product.id = "e207"
I: [pulseaudio] source.c: device.product.name = "HP Webcam HD 2300"
I: [pulseaudio] source.c: device.serial =
"Hewlett_Packard_HP_Webcam_HD_2300"
I: [pulseaudio] source.c: device.form_factor = "webcam"
I: [pulseaudio] source.c: device.string = "front:1"
I: [pulseaudio] source.c: device.buffering.buffer_size = "35280"
I: [pulseaudio] source.c: device.buffering.fragment_size = "8820"
I: [pulseaudio] source.c: device.access_mode = "mmap"
I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] source.c: device.description = "HP Webcam HD 2300 Analog
Stereo"
I: [pulseaudio] source.c: alsa.mixer_name = "USB Mixer"
I: [pulseaudio] source.c: alsa.components = "USB03f0:e207"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "camera-web-usb"
I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 8820 bytes
(50.00ms), buffer size is 35280 bytes (200.00ms)
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from -12.00 dB to 12.00
dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -12.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale
supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR
scheduling for thread, with priority 5.
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #1; argument:
"device_id="1" name="usb-Hewlett_Packard_HP_Webcam_HD_2300-02"
card_name="alsa_card.usb-Hewlett_Packard_HP_Webcam_HD_2300-02"
namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no
deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card
/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/sound/card1
(alsa_card.usb-Hewlett_Packard_HP_Webcam_HD_2300-02) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file
/usr/share/alsa/ucm/bcm2835 ALSA/bcm2835 ALSA.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for
card bcm2835 ALSA
I: [pulseaudio] (alsa-lib)main.c: error: failed to import bcm2835 ALSA use case
configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card bcm2835 ALSA
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.front.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or
directory
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.front.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or
directory
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.surround51.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround21:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:0: No such
file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.surround40.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: No such
file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.surround51.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround41:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: No such
file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.surround51.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround50:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: No such
file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.surround51.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: No such
file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.surround71.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: No such
file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.iec958.0:CARD=0,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM iec958:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or
directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or
directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,1
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,1: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,2
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,2: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,3
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,3: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,4
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,4
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,4
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,4: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,4
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,4: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,5
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,5
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,5
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,5: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,5
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,5: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,6
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,6
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,6
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,6: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,6
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,6: No such file
or directory
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,7
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,7
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: Invalid argument
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,7
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,7: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:0,7
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:0,7: No such file
or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or
directory
I: [pulseaudio] card.c: Created 1 "alsa_card.0"
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition
'cards.bcm2835.pcm.front.0:CARD=0'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No
such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
W: [pulseaudio] alsa-util.c: Unable to convert error string to locale,
filtering.
I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or
directory
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-sink.c: Successfully opened device hw:0.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.0.analog-stereo" with
sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "bcm2835 ALSA"
I: [pulseaudio] sink.c: alsa.id = "bcm2835 ALSA"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "0"
I: [pulseaudio] sink.c: alsa.card = "0"
I: [pulseaudio] sink.c: alsa.card_name = "bcm2835 ALSA"
I: [pulseaudio] sink.c: alsa.long_card_name = "bcm2835 ALSA"
I: [pulseaudio] sink.c: device.bus_path = "/devices/virtual/sound/card0"
I: [pulseaudio] sink.c: sysfs.path = "/devices/virtual/sound/card0"
I: [pulseaudio] sink.c: device.string = "hw:0"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "35280"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "8816"
I: [pulseaudio] sink.c: device.access_mode = "mmap"
I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
I: [pulseaudio] sink.c: device.description = "bcm2835 ALSA Analog Stereo"
I: [pulseaudio] sink.c: alsa.mixer_name = "Broadcom Mixer"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
I: [pulseaudio] source.c: Created source 1
"alsa_output.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and
channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of bcm2835 ALSA
Analog Stereo"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "0"
I: [pulseaudio] source.c: alsa.card_name = "bcm2835 ALSA"
I: [pulseaudio] source.c: alsa.long_card_name = "bcm2835 ALSA"
I: [pulseaudio] source.c: device.bus_path = "/devices/virtual/sound/card0"
I: [pulseaudio] source.c: sysfs.path = "/devices/virtual/sound/card0"
I: [pulseaudio] source.c: device.string = "0"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card"
I: [pulseaudio] alsa-sink.c: Using 4.0 fragments of size 8816 bytes (49.98ms),
buffer size is 35280 bytes (200.00ms)
I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -99999.99 dB to 4.00
dB.
I: [pulseaudio] alsa-sink.c: Fixing base volume to -4.00 dB
I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale
supported.
I: [pulseaudio] alsa-sink.c: Using hardware mute control.
I: [alsa-sink-bcm2835 ALSA] core-util.c: Successfully enabled SCHED_RR
scheduling for thread, with priority 5.
I: [alsa-sink-bcm2835 ALSA] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #2; argument:
"device_id="0" name="0" card_name="alsa_card.0" namereg_fail=false tsched=no
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/virtual/sound/card0
(alsa_card.0) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 2 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #0; argument:
"tsched=0").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #3;
argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #4;
argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file
'/var/lib/pulse/b1886a3027d3ec76e900519200000004-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #5; argument:
"").
I: [pulseaudio] module-device-restore.c: Successfully opened database file
'/var/lib/pulse/b1886a3027d3ec76e900519200000004-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #6; argument:
"").
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #7;
argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #8; argument:
"").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #10;
argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-connect" (index: #11;
argument: "").
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #12;
argument: "").
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #14;
argument: "headset=auto").
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #13;
argument: "headset=auto").
I: [pulseaudio] main.c: Daemon startup complete.
I: [pulseaudio] card.c: Created 2 "bluez_card.08_FD_0E_5A_90_3B"
W: [pulseaudio] core-error.c: Unable to convert error string to locale,
filtering.
E: [pulseaudio] backend-ofono.c: Deferred setup failed on fd -1: Transport
endpoint is not connected
I: [pulseaudio] sink.c: Created sink 1 "bluez_sink.08_FD_0E_5A_90_3B" with
sample spec s16le 1ch 8000Hz and channel map mono
I: [pulseaudio] sink.c: bluetooth.protocol = "headset_audio_gateway"
I: [pulseaudio] sink.c: device.description = "femtoGalaxy S4"
I: [pulseaudio] sink.c: device.string = "08:FD:0E:5A:90:3B"
I: [pulseaudio] sink.c: device.api = "bluez"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: device.bus = "bluetooth"
I: [pulseaudio] sink.c: device.form_factor = "phone"
I: [pulseaudio] sink.c: bluez.path = "/org/bluez/hci0/dev_08_FD_0E_5A_90_3B"
I: [pulseaudio] sink.c: bluez.class = "0x5a020c"
I: [pulseaudio] sink.c: bluez.alias = "femtoGalaxy S4"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-bluetooth"
I: [pulseaudio] source.c: Created source 2
"bluez_sink.08_FD_0E_5A_90_3B.monitor" with sample spec s16le 1ch 8000Hz and
channel map mono
I: [pulseaudio] source.c: device.description = "Monitor of femtoGalaxy S4"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.string = "08:FD:0E:5A:90:3B"
I: [pulseaudio] source.c: device.api = "bluez"
I: [pulseaudio] source.c: device.bus = "bluetooth"
I: [pulseaudio] source.c: device.form_factor = "phone"
I: [pulseaudio] source.c: bluez.path =
"/org/bluez/hci0/dev_08_FD_0E_5A_90_3B"
I: [pulseaudio] source.c: bluez.class = "0x5a020c"
I: [pulseaudio] source.c: bluez.alias = "femtoGalaxy S4"
I: [pulseaudio] source.c: device.icon_name = "audio-card-bluetooth"
I: [pulseaudio] source.c: Created source 3 "bluez_source.08_FD_0E_5A_90_3B"
with sample spec s16le 1ch 8000Hz and channel map mono
I: [pulseaudio] source.c: bluetooth.protocol = "headset_audio_gateway"
I: [pulseaudio] source.c: device.description = "femtoGalaxy S4"
I: [pulseaudio] source.c: device.string = "08:FD:0E:5A:90:3B"
I: [pulseaudio] source.c: device.api = "bluez"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: device.bus = "bluetooth"
I: [pulseaudio] source.c: device.form_factor = "phone"
I: [pulseaudio] source.c: bluez.path =
"/org/bluez/hci0/dev_08_FD_0E_5A_90_3B"
I: [pulseaudio] source.c: bluez.class = "0x5a020c"
I: [pulseaudio] source.c: bluez.alias = "femtoGalaxy S4"
I: [pulseaudio] source.c: device.icon_name = "audio-card-bluetooth"
I: [bluetooth] core-util.c: Successfully enabled SCHED_RR scheduling for
thread, with priority 5.
I: [pulseaudio] resampler.c: Speex appears to be compiled with
--enable-fixed-point. Switching to a fixed-point resampler because it should be
faster.
I: [pulseaudio] speex.c: Choosing speex quality setting 0.
I: [pulseaudio] sink-input.c: Created input 0 "(null)" on
bluez_sink.08_FD_0E_5A_90_3B with sample spec s16le 1ch 8000Hz and channel map
mono
I: [pulseaudio] sink-input.c: media.role = "abstract"
I: [pulseaudio] sink-input.c: module-stream-restore.id =
"sink-input-by-media-role:abstract"
I: [pulseaudio] source-output.c: Trying to change sample rate
I: [alsa-source-USB Audio] alsa-source.c: Device suspended...
I: [pulseaudio] alsa-source.c: Updating rate for device front:1, new rate is
48000
I: [pulseaudio] source.c: Changed sampling rate successfully
I: [alsa-source-USB Audio] alsa-source.c: Trying resume...
I: [alsa-source-USB Audio] alsa-source.c: Resumed successfully...
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] source-output.c: Rate changed to 48000 Hz
I: [pulseaudio] resampler.c: Speex appears to be compiled with
--enable-fixed-point. Switching to a fixed-point resampler because it should be
faster.
I: [pulseaudio] remap_neon.c: Using ARM NEON stereo to mono remapping
I: [pulseaudio] speex.c: Choosing speex quality setting 0.
I: [pulseaudio] source-output.c: Created output 0 "(null)" on
alsa_input.usb-Hewlett_Packard_HP_Webcam_HD_2300-02.analog-stereo with sample
spec s16le 1ch 8000Hz and channel map mono
I: [pulseaudio] source-output.c: media.role = "phone"
I: [pulseaudio] source-output.c: module-stream-restore.id =
"source-output-by-media-role:phone"
I: [bluetooth] module-loopback.c: Max request changed
I: [alsa-source-USB Audio] module-loopback.c: Skipping 0 bytes
I: [pulseaudio] module.c: Loaded "module-loopback" (index: #16; argument:
"sink="bluez_sink.08_FD_0E_5A_90_3B" sink_dont_move="true"
source_output_properties="media.role=phone"").
I: [pulseaudio] resampler.c: Speex appears to be compiled with
--enable-fixed-point. Switching to a fixed-point resampler because it should be
faster.
I: [pulseaudio] speex.c: Choosing speex quality setting 0.
I: [pulseaudio] sink-input.c: Created input 1 "(null)" on
bluez_sink.08_FD_0E_5A_90_3B with sample spec s16le 1ch 8000Hz and channel map
mono
I: [pulseaudio] sink-input.c: media.role = "phone"
I: [pulseaudio] sink-input.c: module-stream-restore.id =
"sink-input-by-media-role:phone"
I: [pulseaudio] source-output.c: Created output 1 "(null)" on
bluez_source.08_FD_0E_5A_90_3B with sample spec s16le 1ch 8000Hz and channel
map mono
I: [pulseaudio] source-output.c: media.role = "abstract"
I: [pulseaudio] source-output.c: module-stream-restore.id =
"source-output-by-media-role:abstract"
I: [bluetooth] module-loopback.c: Max request changed
I: [bluetooth] module-loopback.c: Skipping 0 bytes
I: [pulseaudio] module.c: Loaded "module-loopback" (index: #17; argument:
"source="bluez_source.08_FD_0E_5A_90_3B" source_dont_move="true"
sink_input_properties="media.role=phone"").
I: [pulseaudio] module-switch-on-connect.c: Successfully moved source output 0
"(null)" to bluez_source.08_FD_0E_5A_90_3B.
I: [pulseaudio] module.c: Loaded "module-bluez5-device" (index: #15; argument:
"path=/org/bluez/hci0/dev_08_FD_0E_5A_90_3B").
I: [pulseaudio] module-device-restore.c: Storing port for device
sink:bluez_sink.08_FD_0E_5A_90_3B.
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port
sink:bluez_sink.08_FD_0E_5A_90_3B:phone-output.
I: [pulseaudio] module-device-restore.c: Storing port for device
source:bluez_sink.08_FD_0E_5A_90_3B.monitor.
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port
source:bluez_sink.08_FD_0E_5A_90_3B.monitor:null.
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream
sink-input-by-media-role:abstract.
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-media-role:phone.
I: [pulseaudio] module-device-restore.c: Storing port for device
source:bluez_source.08_FD_0E_5A_90_3B.
I: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port
source:bluez_source.08_FD_0E_5A_90_3B:phone-input.
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream
sink-input-by-media-role:phone.
I: [pulseaudio] module-stream-restore.c: Storing volume/mute/device for stream
source-output-by-media-role:abstract.
I: [pulseaudio] module-stream-restore.c: Synced.
I: [pulseaudio] module-device-restore.c: Synced.
_______________________________________________
ofono mailing list
[email protected]
https://lists.ofono.org/mailman/listinfo/ofono
