Thanks for your response. Is there a way to use only the speaker and not the microphone?
I have some issues with the microphone on my system. On 3/7/17, Georg Chini <[email protected]> wrote: > On 06.03.2017 20:08, Sriram V wrote: >> Hi greg, >> >> I have in the default.pa file.. However, when i issue the command >> using commandline after pulseaudio is executed. i get the error >> >> shared memfd open() failed: Function not implemented >> Connection failure: Connection refused >> pa_context_connect() failed: Connection refused > > Which command? Have you run pulseaudio with debug output? > >> >> Not sure, if i am missing anything. Is it possible to find out what >> modules pulse audio has loaded after processing default.pa file? >> >> Also, What does the below message mean? >> >> W: [pulseaudio] module-loopback.c: Sample rates too different, not >> adjusting (8000 vs. 24736). > > The loopback modules get inserted to connect your speakers/microphone > to your phone (two of them, one for phone output -> speakers and one > for microphone -> phone input). The error message probably originates > from the second module. > It means that module-loopback will not try to adjust the latency, because > the current latency is too far away from the latency that is configured. > Module loopback normally tries to adjust the latency to 200ms if not > otherwise specified by using a different output rate than the input rate. > This way, the samples are played a bit faster or slower until the > configured > latency is reached. If the output sample rate would be too far from the > input rate, module loopback refuses to do the correction. > In your case it probably means that the microphone is pushing audio > into the loopback module which is not played back to the phone for some > reason and so accumulates in the buffer of the loopback module. The > latency is growing more and more, you can see that the sample rates > needed for the correction are increasing. > >> Thanks, >> Sriram >> >> > > _______________________________________________ > ofono mailing list > [email protected] > https://lists.ofono.org/mailman/listinfo/ofono > _______________________________________________ ofono mailing list [email protected] https://lists.ofono.org/mailman/listinfo/ofono
