Hi Mark,
On 09/06/2018 11:31 AM, Mark van der Putten wrote:
In the gemalto plugin (static void gemalto_post_sim(struct ofono_modem
*modem)) or maybe something sooner in startup phase I would like to
implement AT^SGAUTH
Hmm, are you sure you actually need the AT^SGAUTH?
Gemalto is using the atmodem driver. This driver uses PPP. Generally
any CHAP/PAP authentication is done during PPP negotiation phase, not
via any vendor +FOOAUTH commands (although I think there are a few
exceptions now)
For modems that use a high-speed interface, the auth parameters are sent
during context setup phase. e.g. after +CGDCONT. See
drivers/ifxmodem/gprs-context.c setup_cb() for an example.
If you do need the SGAUTH, then the logical place to put it would be
into drivers/atmodem/gprs-context.c and use a vendor quirk for gemalto.
E.g. something like:
switch(gcd->vendor) {
case OFONO_VENDOR_GEMALTO:
g_at_chat_send(gcd->chat, "AT^XGAUTH..."....);
break;
}
Regards,
-Denis
_______________________________________________
ofono mailing list
[email protected]
https://lists.ofono.org/mailman/listinfo/ofono
