Hi,
Do you force ofono to detect a sim7600 at /dev/ttymxc1?
Can you how we can achieve this. We have recently started working with
ofono.
Thanks.
Kind Regards,
Pranoti B.
-----Original Message-----
From: Funktionspostfach Herbrechtsmeier OSS
Sent: Monday, May 27, 2019 2:26 PM
To: Pranoti Bobade ; [email protected]
Subject: AW: Regarding ofonod sending signal 11 after calling setup_sim7x00
for sim7600
Hi,
ofono assumes that you use a USB interface with multiple serial interfaces.
I suppose the second DBG in setup_sim7x00() failed because of a NULL in
info->number.
Do you force ofono to detect a sim7600 at /dev/ttymxc1?
Best regards,
Stefan
-----Ursprüngliche Nachricht-----
Von: ofono [mailto:[email protected]] Im Auftrag von Pranoti Bobade
Gesendet: Montag, 20. Mai 2019 09:35
An: [email protected]
Betreff: Fw: Regarding ofonod sending signal 11 after calling setup_sim7x00
for sim7600
-----Original Message-----
From: Pranoti Bobade
Sent: Friday, May 17, 2019 5:28 PM
To: [email protected]
Subject: Regarding ofonod sending signal 11 after calling setup_sim7x00 for
sim7600
Hello,
Hope you are doing well. We are currently working with ofono to make
sim7600e work with our ARM based embedded board. Our modem is connected
through serial interface. We have cloned the latest git repository for ofono
and compiled it for our board, But when we run ofonod it gives segmentation
fault in setup_sim7x00() from plugins/udevng.c. Screenshot is attached with
the mail for reference. Our query is to know if there is support for Serial
interface of sim7600e.
Thanks in advance.
_______________________________________________
ofono mailing list
[email protected]
https://lists.ofono.org/mailman/listinfo/ofono
