On XMM modems SIM is busy after PUK is entered. CME ERROR: 14
is received for AT+CPIN? query. Therefore polling for CPIN: READY
state.
---
drivers/atmodem/sim.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/atmodem/sim.c b/drivers/atmodem/sim.c
index e750a13..3ed5aa0 100644
--- a/drivers/atmodem/sim.c
+++ b/drivers/atmodem/sim.c
@@ -1354,13 +1354,14 @@ static void at_pin_send_cb(gboolean ok, GAtResult
*result,
case OFONO_VENDOR_HUAWEI:
case OFONO_VENDOR_SIMCOM:
case OFONO_VENDOR_SIERRA:
+ case OFONO_VENDOR_XMM:
/*
* On ZTE modems, after pin is entered, SIM state is checked
* by polling CPIN as their modem doesn't provide unsolicited
* notification of SIM readiness.
*
- * On SIMCOM modems, SIM is busy after pin is entered (we
- * got a "+CME ERROR: 14" for the "AT+CPIN?" request) and
+ * On SIMCOM and XMM modems, SIM is busy after pin is entered
+ * (we got a "+CME ERROR: 14" for the "AT+CPIN?" request) and
* ofono don't catch the "+CPIN: READY" message sent by the
* modem when SIM is ready. So, use extra CPIN to check the
* state.
--
1.9.1
_______________________________________________
ofono mailing list -- [email protected]
To unsubscribe send an email to [email protected]
