Hi,
I installed WinOF 2.1 RC4 in w2k3 x86 platform, but IPoIB fails to load
in it. The event log reports weird FW version as 0.0 and FW not supported.
>>>Ven 15b3 Dev 25208 Hw 0 Fw 0.0.0 Drv 1.0.0000.566
&
>>>HCA FW version 4.6.2 is not supported. Use 4.7.0 o
Also, vstat is not reporting device names properly
--------------
>vstat.exe
hca_idx=0
uplink={BUS=UNRECOGNIZED (0)}
vendor_id=0x15b3
vendor_part_id=25208
ATTENTION!
The driver has reported zero physical ports.
It can be a result of incompatibility of user and kernel compone
It can be also caused by a driver failure on startup.
Look into System Event Log for driver reports.
Use firmware tools to solve the problem (in second case).
The work with IB stack is impossible.
------------------------
Please let me know if you see any issue with the configuration.
Regards,
Prasanna
_______________________________________________
ofw mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
