Yes, you're right: 1. The "dirs" file should contains ipoib_NDIS6_CM 2. The add-on to makefile of ipoib based on NDIS 5: # # prevent the Build utility from building the driver for later # version of the operating system than windows 2003 # MAXIMUM_NT_TARGET_VERSION=0x502
!INCLUDE ..\..\..\inc\openib.def 3. The add-on to makefile of ipoib based on NDIS 6: # # prevent the Build utility from building the driver for an earlier # version of the operating system than vista/Win 2008. # MINIMUM_NT_TARGET_VERSION=0x600 !INCLUDE ..\..\..\inc\openib.def We already updated SVN with these changes on revision 2506. Thanks Tzachi > -----Original Message----- > From: Stan C. Smith [mailto:[email protected]] > Sent: Friday, October 23, 2009 9:50 PM > To: Tzachi Dar > Cc: [email protected] > Subject: Building the correct IPoIB version for the correct OS > > > Hello, > Are you the correct person to be fielding IPoIB questions > these days? I'll assume so for now. > > Given the requirement NDIS6 IPoIB is only for Vista/Svr2008 > and beyond, then to prevent ipoib.sys name space > overlap/overwrite, is the following what you had in mind for > NDIS5.3 ipoib builds? > Assumption is the ulp\dirs file contains entries for both > ipoib & ipoib_ndis6_cm. > > --- C:/Documents and Settings/scsmith/Local > Settings/Temp/make-revBASE.svn004.tmp Fri Oct 23 12:43:20 2009 > +++ C:/Documents and Settings/scsmith/My > Documents/openIB-windows/SVN/gen1/trunk/ulp/ipoib/kernel/m > akefile Fri Oct 23 12:44:57 > 2009 > @@ -4,4 +4,8 @@ > # that is shared by all the driver components of the OpenIB > Windows project. > # > > +# Build this NDIS 5.3 ipoib for Windows versions prior to Vista/Svr > +2008 > + > +#MAXIMUM_NT_TARGET_VERSION=$(_NT_TARGET_VERSION_WS03) > + > !INCLUDE ..\..\..\inc\openib.def > > > > _______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
