Sean, what happens if you run with the problematic cards using static ip addresses?
What happens when you run another application on that card (for example ib_send_bw.exe)? Thanks Tzachi > -----Original Message----- > From: Anatoly Greenblatt [mailto:[email protected]] > Sent: Sunday, November 08, 2009 2:44 PM > To: Sean Hefty; Tzachi Dar; [email protected] > Subject: RE: [ofw] ipoib and dhcp > > The problem could also be related to guid to mac conversion. > > Anatoly. > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Sean Hefty > Sent: Friday, November 06, 2009 8:20 PM > To: Hefty, Sean; 'Tzachi Dar'; [email protected] > Subject: RE: [ofw] ipoib and dhcp > > >I was able to get this to work on 5 of 8 systems. For some > reason, the > other 3 > >don't want to obtain an address through DHCP. (And, of course, were > the first > >3 > >that I was trying to setup.) I downloaded and run the guid checker > tool from > >the Mellanox website, and it reported that the guids were supported. > All > >systems are using the same software, new install of 2008 HPC with > MT25208 > >driver > >and recent svn tip. (I haven't checked or updated firmware versions > yet.) Any > >ideas at all on this? > > I replaced the HCAs in 2 of the 3 trouble systems, and they > started working. > So, this appears to be a HW/firmware related problem. The > crashes may also be related to this. > > - Sean > > _______________________________________________ > ofw mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw > _______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
