Stanley, Did you ever resolve this? This sounds very similar to my issue, although I never get a successful login in the first place. What rev of SCST are you using? I had previous success w/ the older 2.0.5 Windows driver and older versions of SCST... but now, at SCST r1935, even the older Windows driver has the same issue. I need to recreate what previously worked, then move forward (on the target side) to see when this problem appears.
Thanks, Chris On Tue, Dec 15, 2009 at 12:41 PM, Sufficool, Stanley <[email protected]> wrote: > This is the link to the original BUG > > https://bugs.openfabrics.org/show_bug.cgi?id=1750 > >> -----Original Message----- >> From: Sufficool, Stanley [mailto:[email protected]] >> Sent: Tuesday, December 15, 2009 8:56 AM >> To: scst-devel; [email protected] >> Subject: [Scst-devel] SRP Sends DREQ on Windows reboot >> >> >> I submitted a bug to OpenFabrics Bugzilla regarding the WinOF >> SRP initiator starting and then closing the session (Sending >> DREQ to Target) when the initiator is booted. The disk >> appears to be connected but access attempts fail. >> >> WinOF 2.1 Reboot >> ------------------------------ >> scst: Target template ib_srpt registered successfully >> scst: Target <NULL> (ffff8800390c1400) for template ib_srpt >> registered successfully Received SRP_LOGIN_REQ with i_port_id >> 0x1a4bffff0cd044:0x19bbffff00d7c8, >> t_port_id 0x1a4bffff0cd044:0x1a4bffff0cd044 and length 2116 on port 2 >> (guid=0xfe80000000000000:0x1a4bffff0cd046) >> scst: Using security group "nas02" for initiator >> "0x001a4bffff0cd0440019bbffff00d7c8" >> Received DREQ and sent DREP for session >> 0x001a4bffff0cd0440019bbffff00d7c8. >> Received InfiniBand TimeWait exit for cm_id ffff8800390c1c00. >> >> WinOF SRP connects after the target is stopped, wait for >> WinOF SRP to see the target down, and then started. >> >> Stop SCST SRP Target, wait, and Restart >> ------------------------------ >> scst: Target ffff8800390c1400 for template ib_srpt >> unregistered successfully >> scst: Target template ib_srpt unregistered successfully >> scst: Target template ib_srpt registered successfully >> scst: Target <NULL> (ffff8800391bde00) for template ib_srpt >> registered successfully >> scst: Target ffff8800391bde00 for template ib_srpt >> unregistered successfully >> scst: Target template ib_srpt unregistered successfully >> scst: Target template ib_srpt registered successfully >> scst: Target <NULL> (ffff8800391bd800) for template ib_srpt >> registered successfully Received SRP_LOGIN_REQ with i_port_id >> 0x1a4bffff0cd044:0x19bbffff00d7c8, >> t_port_id 0x1a4bffff0cd044:0x1a4bffff0cd044 and length 2116 on port 2 >> (guid=0xfe80000000000000:0x1a4bffff0cd046) >> scst: Using security group "nas02" for initiator >> "0x001a4bffff0cd0440019bbffff00d7c8" >> >> >> Please advise as to what additional information can be >> provided to get this resolved or if there are any known workarounds. >> >> Windows 2003 SR2 >> WinOF 2.1 >> Linux 2.6.31 >> SRPT ( https://scst.svn.sourceforge.net/svnroot/scst ) Rev 1390 >> >> >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of >> Sufficool, Stanley >> Sent: Tuesday, September 08, 2009 1:39 PM >> To: scst-devel; [email protected] >> Subject: [ofw] SRPT Unexpectedly closes session with WinOF 2.1 reboot >> >> >> When performing a reboot on Windows 2003 SR2 + WinOF 2.1, I >> cannot get the initiator to re-establish connection with the >> SRP target without stopping and restarting the SRP Target. >> >> Attached are the logs from the target showing that the system >> terminates the WinOF SRP session at 13:15:20 when the system >> is rebooted. It then tries to re-establish the session when >> the system comes back up at 13:16:26. The session is then >> closed a few seconds after it is established at 13:16:57. >> >> After this, the WinOF initiator shows the LUN as still >> connected, but gives errors if you try to access it. >> >> Both target and initiator are single connected to the fabric. >> >> Windows 2003 SR2 >> WinOF 2.1-rc4 >> Linux 2.6.30-gentoo-r4 >> SRPT ( https://scst.svn.sourceforge.net/svnroot/scst ) SVN 1062 >> >> >> Stanley Sufficool >> >> P Please consider the environment before printing this e-mail or its >> attachment(s) >> >> -------------------------------------------------------------- >> ---------------- >> This SF.Net email is sponsored by the Verizon Developer >> Community Take advantage of Verizon's best-in-class app >> development support A streamlined, 14 day to market process >> makes app distribution fast and easy Join now and get one >> step closer to millions of Verizon customers >> http://p.sf.net/sfu/verizon-dev2dev >> _______________________________________________ >> Scst-devel mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/scst-devel >> > _______________________________________________ > ofw mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw > _______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
