>From OSM config file:
# Force PortInfo:LinkSpeedEnabled on switch ports
# If 0, don't modify PortInfo:LinkSpeedEnabled on switch port
# Otherwise, use value for PortInfo:LinkSpeedEnabled on switch port
# Values are (IB Spec 1.2.1, 14.2.5.6 Table 146 "PortInfo")
# 1: 2.5 Gbps
# 3: 2.5 or 5.0 Gbps
# 5: 2.5 or 10.0 Gbps
# 7: 2.5 or 5.0 or 10.0 Gbps
# 2,4,6,8-14 Reserved
# Default 15: set to PortInfo:LinkSpeedSupported
force_link_speed 15
-- YK
> -----Original Message-----
> From: [email protected] [mailto:ofw-
> [email protected]] On Behalf Of Fab Tillier
> Sent: Friday, December 10, 2010 8:23 PM
> To: [email protected]
> Subject: [ofw] Limiting bandwidth using OpenSM?
>
> Is there a configuration option to OpenSM that would force it to
> configure all the IB ports at SDR or DDR, even if the hardware supports
> QDR?
>
> Thanks,
> -Fab
> _______________________________________________
> ofw mailing list
> [email protected]
> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
_______________________________________________
ofw mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
