Hi Sean, as I had more urgent things to do, it took me some time doing your test. I now have upgraded my machines to 3.1 GA, which also took some time as it required a firmware upgrade, but the problem persists in exactly the same way. If I create an RDMA end point as user it fails, as administrator it works. I have also the problem that the RDMA functions do not return useful return codes (is this normal?), so everything is just a guess based on the driver code from SVN and playing around with it.
> -----Ursprüngliche Nachricht----- > Von: Hefty, Sean [mailto:[email protected]] > Gesendet: Mittwoch, 7. März 2012 23:08 > An: Tzachi Dar; Smith, Stan; Fab Tillier; Christoph Müller > Cc: [email protected] > Betreff: RE: [ofw] WinVerbs address translation required administrative > privileges > > According to the initial bug report, the function below is what's failing. > There's nothing obvious to me why it should fail without administrative > permission. It sounds like the CreateFileW() call is failing. > > TranslateAddress(const SOCKADDR* pAddress, WV_DEVICE_ADDRESS* [...] > If the printip test is included in the OFED release, that could be run to see > if > the permission issue is specific to IBAT, rather than some interaction > between winverbs and ibat. The following code in ipoib is where the ibat file > gets created. printip is included and I have tested it. From what I see, it works: C:\Program Files\OFED>PrintIP.exe lip 192.168.220.250 Found 1 IP active ports 0: ca guid 0x2c9030010d2a8 port guid 0x2c9030010d2a9 [192.168.219.250] [...] > Note that the default SDDL string is set to NULL. Is there a registry > setting for > ipoib (possibly inherited from NDIS or somewhere else) that gets used if the > SDDL is NULL? Unfortunately, I do not have sufficient knowledge to understand what I should do with this information. If you have more detailed instruction on what to do, I have no problem trying it. I might also be able to able to attach a kernel debugger to the machine, but I would need some information on what I need to build and how to install my own build. Best regards, Christoph _______________________________________________ ofw mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw
