Hallo Alasdair, Thanks for the answer!
Will try. Regards, From: [email protected] To: [email protected] Date: Mon, 28 Apr 2014 11:35:04 +0000 Subject: Re: [oi-dev] flowcontrol 10Gbe intel x520 Hi Randy, Your best bet is to mail the illumos mailing list - none of the illumos developers hang out on the oi-dev mailing list, this list is for distribution work (i.e. packaging etc). To test the patch on that issue, you'd have to rebuild illumos-gate and install the resulting packages. Cheers, Alasdair From: [email protected] To: [email protected] Date: Sat, 26 Apr 2014 23:44:48 +0200 Subject: Re: [oi-dev] flowcontrol 10Gbe intel x520 I found the following issue regarding this nic.Can anyone tell me if the fix in this document has been implemented yet or what the status isIt seems to solve my problem (if it is a stable fix).If somebody could give me a short mini howto on implementing / testing this? https://www.illumos.org/issues/4063 Regards, RFrom: [email protected] To: [email protected] Date: Sat, 26 Apr 2014 12:25:35 +0200 Subject: [oi-dev] flowcontrol 10Gbe intel x520 Hi all,I hope this is readable . Using an OI 151a7 I'm trying to turn off flowcontroll on an Intel X520-DA2 10Gbe nicI have put flow_control = 0; in /kernel/drv/ixgbe.conf and also done:dladm set-linkprop -p flowctrl=no ixgbe0 results after reboot: dladm show-ether -x ixgbe0 LINK PTYPE STATE AUTO SPEED-DUPLEX PAUSE ixgbe1 current up yes 10G-f bi-- capable -- yes 1G-f,100M-f bi-- adv -- yes 1G-f bi-- peeradv -- no -- none ============================================================== dladm show-linkprop -p flowctrl ixgbe0 LINK PROPERTY PERM VALUE DEFAULT POSSIBLEixgbe0 flowctrl rw no no no,tx,rx,bi ===============================================================The second output seems ok, but the first puzzles me. Als the dladm command doesn't show any immediate effect, I think it doesn't work. question on: can somebody clarify to me if flowcontrol is now turned off or not? And if not, what do I have to do to turn it off? I know that there were issues with the ixgbe driver in OI151a7, can this have something todo with that? If this is solved in a9, how would I go about adding the a9 driver to this a7 system (if thats's possible). Greetings, _______________________________________________ oi-dev mailing list [email protected] http://openindiana.org/mailman/listinfo/oi-dev _______________________________________________ oi-dev mailing list [email protected] http://openindiana.org/mailman/listinfo/oi-dev _______________________________________________ oi-dev mailing list [email protected] http://openindiana.org/mailman/listinfo/oi-dev
_______________________________________________ oi-dev mailing list [email protected] http://openindiana.org/mailman/listinfo/oi-dev
