Regarding a 235 motor that is in a '46, have any of you converted to a modern
oil filter setup? If so
what hardware or modifications are needed? The motor is approximately a '55
thanks!
john
________________________________
From: [email protected] [[email protected]] on
behalf of vernongenis [[email protected]]
Sent: Wednesday, June 06, 2012 6:59 PM
To: [email protected]
Subject: [old-chevy-truck] fuel guage
The question is about my fuel guage. I installed a new sending unit because I
thought the old one was not working. The new one does the same thing. Heres the
problem.When I turn on the key the guage moves up to the "E"and stops. The gas
tank is full. If I take the ground wire off it moves to full. I then put the
groung wire back on and it stays at full.If I turn the key off and then back on
it just returns to thr "E" again.Any help. My truck is a 1950 3600 that I just
tatally restored.Vern E.
------------------------------------
Ole Chevy and GMC trucks rule!
To unsubscribe, send an email (with no subject, no body, just the email), to:
[email protected]! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/old-chevy-truck/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/old-chevy-truck/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
