Just use a stock coil from your FLAPS. The one from En-Ah-Pe-Ah is Echlin P/N IP7. $46 list, $25 wholesale. Their "value line" (Mileage Plus) coil is IC7SB ($26, $13). Or use it to cross to whatever. The coil mounting bracket is ICB15.
Good luck. Allen '50 3100 ________________________________ From: [email protected] [[email protected]] on behalf of Roy [[email protected]] Sent: Thursday, April 04, 2013 8:23 AM To: [email protected]; [email protected] Subject: [old-chevy-truck] Coils - Argghhh I switched my electrical system back to 6 volts and so bought a new 6 volt coil from one of the vendors. It seems OK but not sure so I began looking for a better one. As I started looking I discovered that I can't find 6 volt coils but I can find 1.5 or 3.0 ohm coils. ?? So, I Googled everything I could and never got a clear understanding of which I needed so I measured the coil I got from the vendor and it is 1.5 ohm so I ordered a 40K Flame Thrower 1.5 ohm. On the box it says "suitable for 8 cylinder engines. Use 3.0 ohm coil for 6 or 4 cylinder engines except for racing." Can anyone sort this out for me? I am running 6 volts on a 216 6 cylinder engine. Thanks, Roy [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ Ole Chevy and GMC trucks rule! To unsubscribe, send an email (with no subject, no body, just the email), to: [email protected]! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/old-chevy-truck/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/old-chevy-truck/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
