Report of tests 

https://drive.google.com/file/d/0B6QC6kfs4JvUU0FoLTM0dk56VVE/edit?usp=sharing


it is much better, but we have still problem with nvidia proprietary
installation 

BUG 575 [3] - Installing proprietary drivers from nvidia: Regression 

And we have problem to manage double monitor during installation and
also after first reboot, 

 now I'm going to report a new bug but if someone can check is better

I found visualizzation problem during installation process but also a
problem with the mouse pointer that is missing 

(please note that if a perform the installation with one only monitor
all is OK) 

first tentative of Live boot on EliteBook 8560W was OK but with the
TERRIBLE BEEP always on

but this time after next tentative of boot all was always OK....

Regards

---

Davide_01
http://www.linux-corner.it

Il 2014-03-21 02:39 Rolf Pedersen ha scritto: 

> Hi,
> 
> On 03/20/2014 01:58 PM, Tomasz Paweł Gajc wrote:
> 
>> Hello, after a long time spent on fixing bug 
>> https://issues.openmandriva.org/show_bug.cgi?id=578 [1] finally with 
>> engagement of few fellow cookers finally we can build a bootable iso. So 
>> here you are: 64 bit: 
>> https://abf.io/platforms/openmandriva2014.0/products/70/product_build_lists/2989
>>  [2]
> 
> For verified 2989 iso and verified burn to dvd, I get no boot. I tried 
> several iterations of the default install menu item, one for the live 
> session, one for basic graphics. AFAICT, they all get through initial 
> boot messages and end in a black screen, keyboard, eventually, dead. 
> Where I removed splash=silent, I saw the login prompt, where keyboard 
> was operational. Shortly after that, apparently while X is started and 
> after about the same time in all the attempts, the keyboard goes dead 
> and stays there, up to 10 minutes I waited once, and a reset is 
> necessary. One boot, with no apparent difference, I added the commands 
> advised from a bit earlier post:
> 
> debug quiet plymouth.enable=0 systemd.log_level=debug 
> systemd.log_target=kmsg log_buf_len=1M
> 
> I once tried nokmsboot. An attached text file of inxi -F output shows 
> some hardware information.
> Thanks,
> Rolf
 

Links:
------
[1] https://issues.openmandriva.org/show_bug.cgi?id=578
[2]
https://abf.io/platforms/openmandriva2014.0/products/70/product_build_lists/2989
[3] https://issues.openmandriva.org/show_bug.cgi?id=575


Reply via email to