you can achive that by changing the switch port inventorisation in the rules section in wato. just search for switch in the rules and look out for inventory rules. Play around with the settings till it fulfills your needs, i have achieved similar with Cisco/hp switches, on noname your millage may vary. PM me if you need further help. W/ regards Jarek
Am 02.03.2017 17:19 schrieb "DOBRYADMIN.PL Paweł Malicki" <[email protected] >: Hello I have a cisco switch 100 Mbit/s that I'd like to monitor port states on it - the speed and operation state When a host is connected and running the if speed goes to 100 Mbit/s and the state goes up. When the host is off the if speed goes to 10 Mbit/s and the state goes down. Is there a way to set up the Network interface and switchport rules so both conditions apply for a single Interface? The switch is set up for auto and I'd like to leave it that way than to enforce the 100 Mbit connection. Thanks in advance. --- DOBRYADMIN.PL Paweł Malicki kom. (+48) 730-798-630 ul. Długa 47C/9, 87-100 Toruń NIP: 9562198443 REGON: 362121051 _______________________________________________ omd-users mailing list [email protected] http://lists.mathias-kettner.de/mailman/listinfo/omd-users
_______________________________________________ omd-users mailing list [email protected] http://lists.mathias-kettner.de/mailman/listinfo/omd-users
