Thanks a lot ! This user intent to replace the entire pool, so it is the best to change it .
But I have no idea what I have to do so ... Point me to a doc with this info and I will read and apply . Many thanks again .... Fábio Rabelo 2014-10-06 11:48 GMT-03:00 Schweiss, Chip <c...@innovates.com>: > Looks like you are trying to add a 4K disk to pool with ashift=9. > > If the disk is a 512e disk you can force it to ashift=9 by adding an entry > in sd.conf. This will degrade write performance. It's best to move the > whole pool to ashift=12 (4K sectors) or find a 512b native disk. > > -Chip > > On Mon, Oct 6, 2014 at 6:46 AM, Fábio Rabelo <fa...@fabiorabelo.wiki.br> > wrote: > >> Hi to all >> >> I have a system with failed hard disk . >> >> When I try to replace it, after 3 to 5 seconds "thinking" the system >> returns a msg like >> >> geometry mismatch error >> >> So, how can I replace a failed disk with another model or size ? >> >> This system uses 2 TB Hard disks, at first, I've installed 4 TB one, >> after this geometry error I get a try with 2 TB model, same result . >> >> >> Fábio Rabelo >> _______________________________________________ >> OmniOS-discuss mailing list >> OmniOS-discuss@lists.omniti.com >> http://lists.omniti.com/mailman/listinfo/omnios-discuss >> > >
_______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss
