> On Dec 12, 2014, at 11:49 AM, Floris van Essen ..:: House of Ancients Amstafs > ::.. <[email protected]> wrote: > > Hi Dann, > > No problem, just happy you did :-) > > Right, so as might remember I had to reinstall because I was running bloody > R11 , but there was a problem upgrading , so just did a fresh install > Had to skip r12 because I simply couldn't install it, as there was a > installer issue with r12...
Weird. I JUST updated the 012 install media thanks to illumos #5421, so you may want to try that again. > So here we are again, running bloody r13 , fully updated :-) > > # dladm show-ether > LINK PTYPE STATE AUTO SPEED-DUPLEX PAUSE > e1000g1 current up yes 1G-f bi > e1000g0 current up yes 1G-f bi > igb0 current up yes 1G-f bi > igb1 current up yes 1G-f bi > igb2 current up yes 1G-f bi > igb3 current up yes 1G-f bi > # dladm show-link > LINK CLASS MTU STATE BRIDGE OVER > e1000g1 phys 1500 up -- -- > e1000g0 phys 1500 up -- -- > aggr0 aggr 1500 up -- e1000g0 e1000g1 > igb0 phys 1500 up -- -- > igb1 phys 1500 up -- -- > igb2 phys 1500 up -- -- > igb3 phys 1500 up -- -- Tis all looks sane. You're showing 1Gig, full dupliex, and up. This seems sane. > # ifconfig -a > lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 > index 1 > inet 127.0.0.1 netmask ff000000 > aggr0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 > inet x.x.x.11 netmask ffffff00 broadcast x.x.x.255 > ether 0:30:48:d5:ec:94 And you have no problems pinging x.x.x.0/24 addresses? Or do you? > igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3 > inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255 > ether a0:36:9f:2:c2:6c > igb1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4 > inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255 > ether a0:36:9f:2:c2:6d > igb2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5 > inet 192.168.0.3 netmask ffffff00 broadcast 192.168.0.255 > ether a0:36:9f:2:c2:6e > igb3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6 > inet 192.168.0.4 netmask ffffff00 broadcast 192.168.0.255 > ether a0:36:9f:2:c2:6f Now I can totally see some potential confusion here. You've four addrs all in the same netstack and all with the same prefix. Now granted, they're different MAC addresses, but packets coming in on one interface may have their return traffic going out another. If these are the problem, try using just one (igb0) for starters and "ifconfig igbX down" for 1, 2, and 3. Also, I need to ask --> are either of your e1000g0's shared IPMI/host links? If so, disable the sharing feature in the BIOS. We don't cope with shared-with-IPMI NICs. Dan _______________________________________________ OmniOS-discuss mailing list [email protected] http://lists.omniti.com/mailman/listinfo/omnios-discuss
